Shop All

Morel Hybrid 63 3 Way Car Component Speakers MW Woofers MT300 Tweeters 140w RMS

£1,749.00
In stock
SKU: 91175MPN: Hybrid 63
Part of the range · 14 productsPart of the Morel Hybrid range · 14 products See the range →

The Morel Hybrid 63 is a 6.5" 3-way component speaker system from Morel's fifth-generation Hybrid range, comprising MW6 Mk2 woofers, CDM700 midranges, MT300 28mm silk dome tweeters and MXR300.4 crossovers, rated at 140W RMS.

The midrange in this set is the Morel Hybrid CDM700. For a 2-way setup, see the Morel Hybrid 62.

Key specifications

  • Size: 6.5"
  • Configuration: 3-way component with CDM700 midranges
  • Woofer: MW6 Mk2, damped polymer cone, rubber surround
  • Tweeter: MT300 28mm silk dome
  • Power handling: 140W RMS, 600W peak
  • Impedance: 4 ohms
  • Sensitivity: 91 dB (2.83V)
  • Frequency response: 35 – 25,000 Hz
  • Mounting: 5 1/2" cutout, 2 7/16" top-mount depth, 2 11/16" bottom-mount depth

Morel Hybrid 63: 6.5" 3-Way Component Speaker System

Now in their fifth generation, Morel's Hybrid systems deliver a refined listening experience built around a subtle balance of resolution, power and efficiency. The Hybrid 63 is suited to drivers who want a fuller, more detailed front stage across any music genre.

C.A.R Filter

Controlled Acoustic Resistance. Most car speakers are installed in a virtual free-air environment — such as a door — which provides minimal acoustic loading. The C.A.R. Filter™ controls airflow within the driver to mimic the effects of a cabinet, improving power handling by 30% and giving greater control over cone movement for improved bass dynamics.

EVC Motor

EVC™ technology uses large voice coils with the magnetic drive system positioned within the coil. This eliminates stray magnetic flux by directing all magnetic energy to the voice coil, resulting in an efficient, powerful and compact design with effective heat dissipation and reduced cone breakup for lower distortion.

Handcrafted Acuflex Soft Dome

A specially engineered damping compound applied to the soft domes of Morel tweeters and midranges. The material combination creates a diaphragm with controlled cancelling break-up (accurate–flexing), where each break-up mode is counteracted by another in the opposite direction, leaving a pure, natural sound.

Neodymium Magnet

Neodymium is the most powerful magnet available, allowing Morel to build physically compact tweeters and midranges that fit in tight spaces without compromising sound quality.

Hexatech™ Aluminium Voice Coil

Made from 100% aluminium wire wound in a honeycomb shape, the Hexatech™ voice coil reduces air gaps in the coil windings, increasing efficiency by up to 20%. Its lightweight construction is a key factor in the fast transient response Morel drive units are known for.

Hybrid Magnet Motor

The Hybrid motor combines a ferrite magnet with a powerful neodymium magnet to create a compact, lightweight and powerful motor system. More amplified power is converted into sonic energy, giving strong performance even from a small driver.

DPC Cone

DPC (Damped Polymer Cone) is derived directly from the cones that built Morel's reputation. High self-damping characteristics deliver exceptional sound quality without colouration or harshness.

Specification
Impedance(Ohms)    4
Sensitivity(1W at 1 meter)    N/A
Sensitivityat 2.83 volts    91
Frequency Response   35 - 25k Hz
More specs
  • Speaker Size    6 1/2
  • Design    3-way
  • Tweeter Design    28mm Dome
  • Tweeter Composition    Silk
  • Woofer Composition    Damped Polymer
  • Woofer Surround    Rubber
  • Minimum RMS Wattage    ---
  • Maximum RMS Wattage    140
  • Peak Power Handling (Watts)    600
  • Top-mount Depth (Inches)    2 7/16
  • Bottom-mount Depth (Inches)    2 11/16
  • Cutout Diameter or Length (inches)    5 1/2
  • Mounting Height (Inches)    0.403
What's Included
  • Two MW6mkII Woofers
  • Two CDM700 Midrange
  • Two MT300 Tweeters (with attached 7" length of speaker wire)
  • 2 MXR300.4 Crossovers
  • 2 Woofer grilles (installed)
  • 2 Midrange grilles (installed)
  • 2 Tweeter grilles (installed)
  • 2 Flush mount tweeter housings (with tweeters installed)
  • 2 Flush mount brackets
  • 2 Angled surface mount tweeter housings
  • 2 Rubber bases for the surface mount housings
  • 8 Midrange mounting clips
  • Twelve 3/4" Screws
  • Four 1" Screws
  • Eight 1-1/4" Screws
  • 8 Large speed clips
  • 6 Small speed clips
  • Grille putty
  • Eight 0.25" Crimp-on female quick slides
  • Two 0.187" Crimp-on female quick slides
  • Two 0.110" Crimp-on female quick slides
  • Two 0.187" Quick slide insulating covers
  • Two 0.110" Quick slide insulating covers
  • Installation guide
  • Warranty card
  • Genuine product verification instructions
Product information

Morel

About the Morel Hybrid 63

From our tech experts at CEN

The Morel Hybrid 63 is a 6.5" 3-way component speaker system from Morel's fifth-generation Hybrid range. It pairs MW6 Mk2 woofers and CDM700 midranges with MT300 28mm silk dome tweeters, all managed by the MXR300.4 crossover network, and is rated at 140W RMS with 4-ohm impedance. Frequency response spans 35–25,000 Hz at 91 dB sensitivity (2.83V).

Who it suits

The Hybrid 63 suits drivers who want a dedicated midrange driver for a more detailed, layered front stage across any music style. The CDM700 midrange delivers greater vocal and instrument clarity than a 2-way system can achieve. For a simpler installation at the same power rating, consider the Morel Hybrid 62.

Our tech experts advise

You will need a 5.5" cutout and a minimum top-mount depth of 2 7/16" — measure your door cavity carefully before buying. At 4 ohms and 140W RMS, a separate amplifier is strongly recommended to get the best from this system. Installation is priced per vehicle; see our car audio installation page for details.

Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: What midrange does the Morel Hybrid 63 use?

A: Two Morel CDM700 midranges, supplied with installed grilles and eight midrange mounting clips.

Q: Can the MT300 tweeters be flush or surface mounted?

A: Yes. The box includes flush mount tweeter housings (with tweeters installed) and flush mount brackets, plus angled surface mount tweeter housings with rubber bases.

Q: What crossovers come with the Morel Hybrid 63?

A: Two MXR300.4 crossovers are included.