



Edge Street Series EDSPRO6-E4 Pro Audio Midrange Speakers 6.5 Inch 200w RMS Pair
Couldn't Load Pickup availability
The Edge EDSPRO6-E4 is a pair of Street Series 6.5 inch (165mm) pro audio midrange speakers, rated at 200W RMS (400W peak) each with 96dB sensitivity. Part of Edge's Street Series pro audio range, their 90Hz–20kHz frequency response means they can be used with or without tweeters in high-volume builds.
For extra top end, they pair with Street Series tweeters such as the EDSPRO22T-E3, and the ED6G-E9 6.5 inch steel mesh grilles are available to protect the cones.
Key specifications
- Model: EDSPRO6-E4
- Type: 1 way pro audio midrange
- Size: 6.5" (165mm)
- Power: 200W RMS / 400W peak
- Sensitivity: 96dB
- Frequency response: 90Hz–20kHz
- Impedance: 4 ohms
- Mounting depth: 64mm, mounting diameter: 140mm
Edge Street Series pro audio midrange speakers
The EDSPRO6-E4 shares engineering with Edge's EDX and EDU series, bringing pro-level performance at a more accessible price point. The "Magnus cone" reduces deformation under high stress, while polycotton spiders, OFC high-power voice coils and a dual roll surround support consistent output. High SPL is maintained across a wide frequency range with minimal effort.
Golf ball design cone — Increases cone rigidity and strength, adds a small increase in cone area, and delivers extra output.
Wideband response — The 90Hz–20kHz range reaches into tweeter territory, allowing use without tweeters or with fewer tweeters in pro audio applications. They can also be used as a traditional midrange driver with appropriate crossovers.
High performance — Every component is engineered for output.
Value — Carefully considered parts and design keep performance high without unnecessary cost.
Features
- Non-pressed composite cone
- Copper voice coil winding
- Dual roll foam surround
- Polycotton spiders
- Spade terminals for easy connection
- EVA gasket with custom Edge branding
Explore the full range in Edge Street Series.
Specification
| Type | Pro Audio Midrange |
|---|---|
| Configuration | 1 way |
| Speaker Size | 6.5" (165mm) |
| RMS Power | 200 watts |
| Peak Power | 400 watts |
| Sensitivity | 96dB |
| Frequency Response | 90Hz - 20kHz |
| Impedance | 4 Ohms |
| Mounting Depth | 2.5" (64mm) |
| Mounting Diameter | 5.5" (140mm) |
What's Included
- EDSPRO6-E4
Edge
About the Edge EDSPRO6-E4
From our tech experts at CEN
Edge pro audio midrange drivers, 6.5 inch, handling 200w RMS, built for efficiency and output rather than background listening.
Who it suits
Loud builds and show cars, where efficiency is what makes a system go loud without enormous amplifier power.
Our tech experts advise
Pro drivers usually need baffle or pod mounting and a crossover set well clear of their limits; they are not a straight door swap. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Edge range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Can the EDSPRO6-E4 be used without tweeters?
A: Yes. Its wideband 90Hz to 20kHz response means it can be used without tweeters, or with fewer tweeters, in pro audio setups. It can also be used as a traditional midrange with the appropriate crossovers.
Q: How loud is the EDSPRO6-E4?
A: It has a sensitivity of 96dB and handles 200W RMS (400W peak) per speaker at 4 ohms.
Q: What is the mounting depth of the EDSPRO6-E4?
A: The mounting depth is 2.5 inches (64mm) and the mounting diameter is 5.5 inches (140mm).
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →




































