Edge DB Series EDBPRO10-E3 Pro Audio Midrange Speakers 10 Inch 200w RMS Single Speaker
Couldn't Load Pickup availability
The Edge EDBPRO10-E3 is a 10 inch pro audio midrange speaker from the Edge DB Series, rated at 200W RMS (400W peak) with 99dB sensitivity. This listing is for a single speaker.
This listing is the 10 inch. The Edge DB Series pro audio midrange is also available in 8 inch (EDBPRO8-E3).
Key specifications
- Size: 10 inch
- Type: pro audio midrange, 1 way
- RMS power: 200W
- Peak power: 400W
- Sensitivity: 99dB
- Frequency response: 70Hz – 8.5kHz
- Impedance: 4 ohms
- Mounting depth: 103mm
- Mounting diameter: 237mm
EDBPRO10-E3 pro audio midrange
The DB Series is Edge's entry-level pro audio speaker range, designed to produce high-volume midrange output across a variety of sizes. It uses precision-engineered voice coils and motors to achieve the high efficiency and wide frequency response expected from pro audio.
Cone technology: the EDBPRO10-E3 features a "golf ball" design cone, which increases rigidity and strength while adding a small amount of cone area for extra output. A non-pressed composite cone delivers improved midrange linearity.
Efficiency: at 99dB sensitivity, this is the most efficient speaker in Edge's current pro midrange lineup. Combined with the large 10 inch cone area, it reaches high volume levels even on minimal amplifier power.
Pro audio sound: wide frequency response, high sensitivity and solid power handling make the EDBPRO10-E3 an affordable entry point into pro audio.
Features
- Non-pressed composite cone for improved midrange linearity
- Dual roll foam surround
- Poly cotton spiders
- Spade terminals for easy connection
- EVA gasket with custom Edge branding
Explore the full range in Edge DB Series.
Specification
| Configuration | 1-Way |
|---|---|
| Speaker Size | 10" (257mm) |
| RMS Power | 200 watts |
| Peak Power | 400 watts |
| Sensitivity | 99dB |
| Frequency Response | 70Hz - 8.5kHz |
| Impedance | 4 Ohms |
| Mounting Depth | 4.1" (103mm) |
| Mounting Diameter | 9.3" (237mm) |
What's Included
- EDBPRO10-E3
Edge
About the Edge EDBPRO10-E3
From our tech experts at CEN
Edge pro audio midrange drivers, 10 inch, handling 200w RMS, built for efficiency and output rather than background listening.
Who it suits
Loud builds and show cars, where efficiency is what makes a system go loud without enormous amplifier power.
Our tech experts advise
Pro drivers usually need baffle or pod mounting and a crossover set well clear of their limits; they are not a straight door swap. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Edge range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Edge DB Series
More options from the same range, in stock and ready to go
Save 6% Best Seller Edge 12 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB12A 300w RMS RRP£159.00£149.00 / Save 6%Low stock
Edge DB Series EDB1000.1D-E4 Amp Class D 1 Channel Monoblock Amplifier 1000w RMS £149.99 /Low stock
Save 7% Edge 10 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB10A 250w RMS RRP£149.00£139.00 / Save 7%In stock
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Is the EDBPRO10-E3 sold as a single speaker or a pair?
A: This listing is for a single EDBPRO10-E3 speaker, as stated in the title. Order two for a left and right pair.
Q: What frequency range does the EDBPRO10-E3 cover?
A: It is rated at 70Hz to 8.5kHz, so it is a midrange driver and should be paired with tweeters for the high frequencies and a subwoofer for deep bass.
Q: How deep is the EDBPRO10-E3?
A: The mounting depth is 103mm and the mounting diameter is 237mm. Check these against your door, kick panel or enclosure before ordering.
