Alpine BBX-F1200 Amplifier 4 Channel Class AB Bridgeable Stereo Car Amp 280w RMS
Couldn't Load Pickup availability
Superior sound performance at amazing prices
4 Channel Amplifier BBX-F1200
Designed for Europe
This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.
- Amplifier Type: Class-A/B
- Channel Design: 4/3/2 Channel
- Thermal Control: Thermal Management Control
- Power Supply: DC-DC PWM Power Supply
- Power Supply Design: MOSFET Power
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Crossover: Variable Low-Pass / High-Pass
- Green/red status LED
- 2 pair RCA pre-inputs
High Power, Great Value
This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.
Bass EQ for Best Bass
Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.
Specification
| Terminal Layout | Two-Sided |
|---|---|
| Screw Mount / Wire Cover | Integrated Wire and Mounting Screw Terminals |
| Amplifier Type | Class-A/B |
| Channel Design | 4/3/2 Channel |
| Thermal Control | Thermal Management Control |
| Power Supply | DC-DC PWM Power Supply |
| Power Supply Design | MOSFET Power |
| Current Protection | Over-Current, Over-Voltage and Thermal Protection |
| Crossover | Variable Low-Pass / High-Pass |
| Total Max Power | 600W |
| Per Channel into 4ohms (≤1%THD+N) | 4 x 50W |
| Per Channel into 2ohms (≤1%THD+N) | 4 x 70W |
| Bridged into 4ohms (≤1%THD+N) | 2 x 130W |
| 1/2 Ch | LP/HP: 50Hz – 500Hz |
| 3/4 Ch | LP/HP: 50Hz – 500Hz |
| EQ (Equalizer) | Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only) |
| Footprint | 330 mm x 52 mm x 240 mm |
| Power Requirements | 14.4 V DC (11 V to 16 V) |
| Input Sensitivity | 0.2 - 8.0 V |
| Frequency Response | 5 Hz - 50 kHz (+ 0,-3 dB) |
| Speaker Impedance | 4 or 2 Ω |
| Signal to Noise | S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB |
| Weight | 2.7 Kg |
More specs
| |
What's Included
- Alpine BBX-F1200 Amplifier
FAQs
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
About the brand
Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
