Alpine BBX-T600 Amplifier 2 Channel Class AB Bridgeable Stereo Car Amp 140w RMS
Couldn't Load Pickup availability
Superior sound performance at amazing prices
2 Channel Amplifier BBX-T600
Designed for Europe
The Alpine BBX-T600 is a 2-channel Class AB stereo amplifier built to deliver reliable power and clean audio in a compact, easy-to-fit package.
- Amplifier Type: Class-A/B
- Channel Design: 2/1 Channel
- Thermal Control: Thermal Management Control
- Power Supply: DC-DC PWM Power Supply
- Power Supply Design: MOSFET Power
- Current Protection: Over-Current, Over-Voltage and Thermal Protection
- Crossover: Variable Low-Pass / High-Pass
- Green/red Status LED
- 1 pair RCA pre-inputs
- 1 pair RCA pre-outputs
High Power, Great Value
Rated at 140w RMS, this amp puts out strong, consistent power. It can also be bridged to a single channel for even more output. A solid choice if you want better sound without overspending.
High Pass and Low Pass Filters
These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.
Bass EQ for Best Bass
Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.
Explore the full range in 2 Channel Amplifiers.
Specification
| Terminal Layout | Two-Sided |
|---|---|
| Screw Mount / Wire Cover | Integrated Wire and Mounting Screw Terminals |
| Amplifier Type | Class-A/B |
| Channel Design | 2/1 Channel |
| Thermal Control | Thermal Management Control |
| Power Supply | DC-DC PWM Power Supply |
| Power Supply Design | MOSFET Power |
| Current Protection | Over-Current, Over-Voltage and Thermal Protection |
| Crossover | Variable Low-Pass / High-Pass |
| Total Max Power | 300W |
| Per Channel into 4ohms (≤1%THD+N) | 2 x 50W |
| Per Channel into 2ohms (≤1%THD+N) | 2 x 70W |
| Bridged into 4ohms (≤1%THD+N) | 1 x 130W |
| 1/2 Ch | LP: 50Hz – 250Hz HP: 80Hz – 1.2kHz |
| EQ (Equalizer) | Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB |
| Footprint | 250 mm x 52 mm x 240 mm |
| Power Requirements | 14.4 V DC (11 V to 16 V) |
| Input Sensitivity | 0.2 - 8.0 V |
| Frequency Response | 5 Hz - 50 kHz (+ 0,-3 dB) |
| Speaker Impedance | 4 or 2 Ω |
| Signal to Noise | S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB |
| Weight | 1.9 Kg |
More specs
| |
What's Included
- Alpine BBX-T600 Amplifier
Alpine
About the Alpine BBX-T600
From our tech experts at CEN
A 2-channel amplifier, Class AB, rated at 140w RMS. Enough channels to run a front and rear stage, or a front stage with the rears bridged for a sub.
Who it suits
Drivers who have upgraded their speakers and found the head unit cannot drive them properly. This is the step that makes good speakers sound like good speakers. Amplification is also what turns a van or camper system from loud into clear.
Our tech experts advise
Power ratings only mean something when the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a properly fused feed from the battery on the right gauge cable, which is the part we see done badly most often. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs and what the work involves. See car audio installation.
Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from 2 Channel Amplifiers
More options from the same range, in stock and ready to go
New Release Eton PA 2 Amp Class D 2 Channel Bridgeable Speaker Amplifier 2 x 140w RMS £259.99 /In stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
