Mosconi One 4 | 130 Amp 4 Channel Amplifier Class AB Up to 700 Watts @ 2 Ohm
Couldn't Load Pickup availability
The Mosconi One 4|130 is a 4-channel Class AB amplifier delivering 4 x 130W RMS at 4 ohm and 4 x 175W at 2 ohm, with full MOSFET technology. It suits speaker systems and medium-sized subwoofers, in 4, 3 or 2-channel mode.
Key specifications
- Channels: 4, Class AB
- Power at 4 ohm: 4 x 130W
- Power at 2 ohm: 4 x 175W
- Bridged at 4 ohm: 2 x 350W
- Input sensitivity: 0.35V to 16V
- Crossover: 20 to 225Hz, high pass / low pass / off
- Inputs: low/high level by switch, auto sense
- Dimensions: 310 x 200 x 50mm
- Weight: 2.6kg
Mosconi One 4|130
4 Channel Amplifier Class AB Technology Up to 700 Watts @ 2 Ohm
The MOSCONI ONE 4|130 is a universal 4 channel high quality amplifier in Class AB technology. It is the ideal amplifier for speaker systems and/ or medium-sized subwoofers. The ONE 4|130 is designed as a double stereo amplifier, but can also be operated in three-/ or two-channel mode. Its analogue full MOSFET technology gives it a powerful, refined sound.
- Remote volume control (optional)
- G-HOC slot
- Low level / high level input mode (via switch)
- Auto Sense (only in High Level mode)
Explore the full range in Mosconi.
Specification
| Output power @ 2Ω | 4 x 175 Watts |
|---|---|
| Bridged Output power @ 4Ω | 2 x 350 Watts |
| Input sensitivity | 0.35 V ÷ 16 V |
| Crossover | 20 - 225 Hz / HIGH pass - LOW pass - OFF |
| Dimensions | 310 x 200 x 50 mm |
| Weight | 2,6 kg |
What's Included
- MOSCONI ONE 4 | 130
Mosconi
About the Mosconi MOSCONI ONE 4|130
From our tech experts at CEN
A 4-channel amplifier from Mosconi, Class AB.
Who it suits
Drivers whose speakers have outgrown the head unit. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How powerful is the Mosconi One 4|130?
A: It delivers 4 x 130W at 4 ohm, 4 x 175W at 2 ohm, or 2 x 350W bridged at 4 ohm.
Q: Can the One 4|130 run in 3-channel mode?
A: Yes. It is designed as a double stereo amplifier but can also be operated in three or two-channel mode, for example front speakers plus a subwoofer.
Q: Does the One 4|130 have a built-in crossover?
A: Yes. The crossover covers 20 to 225Hz with high pass, low pass and off settings.
