Mosconi Pico 8 | 10 DSP Amp 8 Channel Amplifier with 10 Channel DSP Up to 600w
Couldn't Load Pickup availability
The Mosconi Pico 8|10 DSP is a compact 8-channel Class D amplifier with a built-in 10-channel DSP, delivering up to 600W in total. It is built for factory radio integration in active, semi-active and front, rear and sub systems.
Key specifications
- Amplifier: 8 channels, Class D
- DSP: 10 channels
- Digital inputs: S/PDIF optical and BT+
- Line outputs: 2 x 2 Vrms (ch 7+8)
- PC connection: USB serial (GUI)
- Dimensions: 150 x 160 x 46mm
Mosconi Pico 8|10 DSP
A compact, high-performance DSP amplifier built for serious sound quality, especially in OEM integration setups.
8 Channel Amplifier Class D Technology Up to 600 Watts @ 2 Ohm
Perfect OEM Integration
Powerful DSP amplifier optimised for factory radio use. Analogue inputs handle up to 30 V, with flexible routing, 3 x input EQ and delay. Its channel layout makes it ideal for active, semi-active, and classic front + rear + sub setups. Two digital inputs (SP-Dif and BT+) plus two processed line outs keep it ready for future expansion.
Transducerless High Speed PWM Amplifiers
High-efficiency PWM output stages run at a very fast carrier frequency of over 2 MHz. This enables HiRes audio transmission and contributes to the unit's extremely compact size. Modulation is handled directly from the 96 kHz TDM signal of the DSP, with no DAC involved. The result is a near-zero noise floor and THD + N of approximately 0.02% at 1 W.
Also available as an 18 Volt version, specially adapted for the electrical systems found in the latest Tesla models.
Explore the full range in Mosconi.
Specification
| ASRCs from 1 | 8 up to 7.75:1 ratio and 139 dB DNR |
|---|---|
| Output power @ 4Ω | 4 x 50 Watts (channel: 1 - 4) 3-Ohm stable (not bridgeable!) |
| Output power @ 4Ω | 4 x 90 Watts (Channel: 5 + 6 / 9 + 10) 2-Ohm stable / bridgeable |
| Output power @ 4Ω | 4 x 50 Watts + 2 x 240 Watts (bridged channel 5 + 6 / 9 + 10) |
| Line Out | 2 x 2 Vrms Line Out (channel: 7 + 8) |
| Overall efficiency | > 80 % |
| Auto-On (only High Level) | Off - BTL |
| Dimensions | 150 x 160 x 46 mm |
| Weight | 1050 gramm |
More specs
| |
What's Included
- MOSCONI PICO 8 | 10 DSP
Mosconi
About the Mosconi MOSCONI PICO 8|10 DSP
From our tech experts at CEN
A 8-channel amplifier from Mosconi, with DSP built in, rated at 600w RMS.
Who it suits
Drivers whose speakers have outgrown the head unit. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
The processing is worth only what the tuning puts into it, which means measurements in the car rather than a preset. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: Is there a Tesla version of the Pico 8|10 DSP?
A: It is also available as an 18V version adapted for the electrical systems of the latest Tesla models. Contact CEN to confirm which version you need.
Q: How big is the Pico 8|10 DSP?
A: It measures 150 x 160 x 46mm, suited to installation behind trim panels.
