Mosconi Pro 1 | 10 EVO Amp Mono 1 Channel Subwoofer Amplifier Class D 900w RMS
Couldn't Load Pickup availability
The Mosconi Pro 1|10 EVO is a mono Class D subwoofer amplifier delivering 900W RMS at 4 ohm, 1600W at 2 ohm and up to 3000W at 1 ohm. It is part of Mosconi's Pro EVO range.
This listing is the Pro 1|10 EVO mono amplifier. The Mosconi Pro range is also available as the Pro 2|10 2-channel stereo amplifier.
Key specifications
- Channels: 1 (mono), Class D
- Power at 4 ohm: 1 x 900W RMS
- Power at 2 ohm: 1 x 1600W RMS
- Power at 1 ohm: 1 x 3000W RMS
- Damping factor: over 1,000
- Input sensitivity: 1 to 8.75V (DIP switch)
- Crossover: DDSP mode only
- Dimensions: 235 x 205 x 55mm
- Weight: 2.5kg
Mosconi Pro 1|10 EVO
The Pro 1|10 EVO is a high-power mono amplifier built for demanding car audio installations. Class D technology and an optimised signal architecture make it well suited to subwoofer and high-power midwoofer applications. If you need a smaller mono subwoofer amplifier, see the Mosconi Pico 1, which delivers up to 750W RMS.
Features
- Class D mono power amplifier
- Up to 3,000W RMS at 1 ohm
- High damping factor (>1,000) for precise speaker control
- Efficiency-optimised design with low heat generation
- DIP switch configuration for exact signal tuning
- DirectDSP input for unaltered signal routing
- Microprocessor monitoring with temperature-controlled fan
- 4-layer PCB with 70 µm copper for minimal losses
Explore the full range in Mosconi.
Specification
| Output power @ 4 Ohm | 1 x 900 watts |
|---|---|
| Output power @ 2 Ohm | 1 x 1600 watts |
| Output power @ 1 Ohm | 1 x 3000 watts |
| Input sensitivity | 1-8.75 Volt |
| Crossover | DDSP mode only |
| Dimensions | 235 x 205 x 55 mm |
| Weight | 2.5 kg |
| Signal-to-noise ratio | 120db |
| Total harmonic distortion | <0.006 % |
| Operating voltage | 9-16 Volt |
| Housing | Black aluminum housing in Italian design |
What's Included
- Mosconi Pro 1 | 10 EVO
Mosconi
About the Mosconi PRE1106118
From our tech experts at CEN
A monoblock subwoofer amplifier from Mosconi, Class D, rated at 900w RMS.
Who it suits
Anyone adding a subwoofer that needs real power behind it. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How powerful is the Mosconi Pro 1|10 EVO?
A: It delivers 1 x 900W at 4 ohm, 1 x 1600W at 2 ohm and 1 x 3000W at 1 ohm.
Q: Does the Pro 1|10 EVO have a built-in crossover?
A: No. It runs in DDSP (DirectDSP) mode only, so filtering is handled by an external DSP feeding its DirectDSP input.
Q: How big is the Pro 1|10 EVO?
A: It measures 235 x 205 x 55mm and weighs 2.5kg, with a temperature-controlled fan.
