Mosconi Pro 2 | 10 Amp 2 Channel Stereo Amplifier Class AB Up to 720w RMS
Couldn't Load Pickup availability
The Mosconi Pro 2|10 is a classic 2-channel Class AB amplifier delivering 2 x 240W RMS at 4 ohm, 2 x 360W at 2 ohm or 720W bridged. Active crossovers, autosense and a DirectDSP input make it very versatile.
Key specifications
- Channels: 2, Class AB
- Power at 4 ohm: 2 x 240W
- Power at 2 ohm: 2 x 360W
- Bridged at 4 ohm: 1 x 720W
- Input sensitivity: 0.35V to 12V (6.2V in DDSP mode)
- Low pass: 43 to 300Hz (24dB/oct)
- High pass: 18 to 280Hz (24dB/oct)
- Dimensions: 235 x 205 x 55mm
- Weight: 2.3kg
Mosconi Pro 2|10
2 Channel Amplifier Class AB Technology Up to 720 Watts @ 2 Ohm
The Mosconi Pro 2|10 amplifier is a classic 2 channel Class AB amplifier. Equipped with active crossovers, autosense function as well as a remote level control input, it is very versatile.
- DDSP - Direct DSP (bypassing all preamplifier circuits)
- High Level / Low Level selectable input
- Autosense (only in BTL mode)
- RTC - Allows volume regulation by remote control (optional)
- Power supply and temperature management controlled by microprocessor
Explore the full range in Mosconi.
Specification
| Output power @ 2Ω | 2 x 360 Watts |
|---|---|
| Bridged Output power @ 4Ω | 1 x 720 Watts |
| Input sensitivity | 0.35 V ÷ 12 V (6.2 V in DDSP mode) |
| Crossover | LOW PASS 43 ÷ 300 Hz [24 dB/Oct] |
| Dimensions | 235 x 205 x 55 mm |
| Weight | 2,3 kg |
More specs
| |
What's Included
- MOSCONI PRO 2 |10
Mosconi
About the Mosconi MOSCONI PRO 4|10
From our tech experts at CEN
A 2-channel amplifier from Mosconi, Class AB, rated at 720w RMS.
Who it suits
Drivers whose speakers have outgrown the head unit. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How powerful is the Mosconi Pro 2|10?
A: It delivers 2 x 240W at 4 ohm, 2 x 360W at 2 ohm, or 1 x 720W bridged at 4 ohm.
Q: Does the Pro 2|10 have built-in crossovers?
A: Yes. It has a low pass filter from 43 to 300Hz and a high pass filter from 18 to 280Hz, both 24dB/oct, plus a DDSP mode that bypasses all preamplifier circuits.
Q: Can the Pro 2|10 take a speaker-level signal?
A: Yes. High level or low level input is selectable, with autosense turn-on in BTL mode.
