Mosconi Pro 4 | 10-AAB EVO Amp 4 Channel Class AAB Bridgeable Amplifier 80w RMS
Couldn't Load Pickup availability
The Mosconi Pro 4|10-AAB EVO is a 4-channel Class AAB bridgeable amplifier delivering 80W RMS per channel at 4 ohm. It is part of Mosconi's PRO line, built for DSP-based sound quality systems.
This listing is the Pro 4|10-AAB EVO. The Mosconi PRO line is also available as the Mosconi Pro 2|10 2-channel stereo amplifier.
Key specifications
- Channels: 4, Class AAB, bridgeable
- Power at 4 ohm: 4 x 80W RMS
- Power at 2 ohm: 4 x 130W RMS
- Bridged at 4 ohm: 2 x 220W RMS
- Input sensitivity: 1 to 8.75V
- Crossover: DDSP mode only
- Signal-to-noise ratio: 108dB
- Dimensions: 235 x 205 x 55mm
- Weight: 2.4kg
The Pro 4|10-AAB EVO is a four-channel Class AAB amplifier with bridgeable channels for flexible system building. Crossover functions operate in DDSP mode only, making it suited for use alongside a dedicated DSP unit.
Sound-First Design
Mosconi's PRO line prioritises sound quality. Class AAB amplification delivers warm, detailed and musical performance.
Explore the full range in Mosconi.
Specification
| Output power at 4 ohms | 4 x 80 watts |
|---|---|
| Output power at 2 ohms | 4 x 130 watts |
| Output power at 4 ohms | 2 x 220 watts |
| Input sensitivity | 1-8.75 volts |
| Crossover | just DDSP-Mode |
| Dimensions | 235 x 205 x 55 mm |
| Weight | 2.4 kg |
| Signal-to-Noise Ratio (SNR) | 108 dB |
| Housing | Available in black |
| Operating voltage | 10-16 volts |
What's Included
- Mosconi Pro 4 | 10 EVO
Mosconi
About the Mosconi PRE4108519
From our tech experts at CEN
A 4-channel amplifier from Mosconi, rated at 80w RMS.
Who it suits
Drivers whose speakers have outgrown the head unit. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How powerful is the Mosconi Pro 4|10-AAB EVO?
A: It delivers 4 x 80W at 4 ohm, 4 x 130W at 2 ohm, or 2 x 220W bridged at 4 ohm.
Q: Does the Pro 4|10-AAB EVO have a built-in crossover?
A: No. It runs in DDSP mode only, so it is designed to be fed by an external DSP or DSP head unit.
Q: How big is the Pro 4|10-AAB EVO?
A: It measures 235 x 205 x 55mm and weighs 2.4kg.
