






Morel Hybrid MW6 MKII 6.5 Inch Component Woofers 140w RMS
Couldn't Load Pickup availability
The Morel Hybrid MW6 MKII are a pair of 6.5 inch component woofers rated at 140W RMS, featuring a one-piece DPC cone, 54mm Hexatech aluminium voice coil and hybrid ferrite/neodymium magnet motor. They are part of the Morel Hybrid range, designed for building or upgrading a Morel Hybrid component speaker system.
These are woofers only (no tweeters). Pair them with the Morel Hybrid MT300 tweeters, or choose the complete Morel Hybrid 62 component system.
Key specifications
- Size: 6.5" (165mm unit diameter)
- Impedance: 4 ohms
- Power handling: 140W RMS, 600W max transient
- Sensitivity: 91 dB (2.83 V/1m)
- Frequency response: 35 – 3,000 Hz
- Cone: one-piece DPC (damped polymer)
- Motor: hybrid ferrite and neodymium, rear vented, 54mm (2.1") Hexatech voice coil
- Mounting cutout: 141mm, mounting depth: 61mm
- Supplied as: pair (2 x MW6 MKII)
Morel Hybrid MW6 MKII woofer
All Hybrid MW models use Morel's core technologies. The 2.1" (54mm) aluminium Hexatech external voice coil is wound on an aluminium former, enabling stable, efficient and linear piston-like movement that reduces distortion.
Morel's one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, producing a realistic three-dimensional sound presentation.
The Hybrid MW6 MKII's suspension improves the mechanical movement and stability of the membrane, contributing to low distortion at high power and better low-frequency dynamic range.
Features
DPC Cone
DPC (Damped Polymer Cone) is a direct derivative of the cones Morel has built its reputation on. High self-damping characteristics deliver exceptional sound quality without colouration or harshness.
Hexatech Aluminium Voice Coil
Made from 100% aluminium wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings, increasing efficiency. Its low mass is a key reason for the fast transient response Morel drive units are known for.
Hybrid Magnet Motor
The hybrid motor combines a ferrite magnet with a powerful neodymium magnet to create a compact, lightweight and powerful motor system. More amplified power is converted into sonic energy, delivering consistent performance even in a small driver.
Explore the full range in Morel Hybrid.
Specification
| Nominal Impedance (ohm) | 4 |
|---|---|
| Power Handling | Wrms 140 |
| Max. Trans. Pwr Handling Wrms | 600 |
| Sensitivity | (2.83 V/1M) dB 91 |
| Frequency response | Hz 35 - 3000 |
| Resonant Freq. Fs Hz | 45 |
| Voice Coil | Diameter mm (inch) 54 (2.1) |
| Voice Coil | Height mm (inch) 11 (0.47) |
| Voice Coil | Type/Former Aluminium |
| Voice Coil | Wire Hexatech™ Aluminium |
| DC Resistance (ohm) | 3 |
| Voice Coil | Induct. @1 kHz (mH) 0.22 |
| Magnet | System Hybrid rear vented |
| HE-Magnetic Gap Height mm (inch) | 4 (0.16) |
| B-Flux Density (T) | 0.83 |
| BL Product/BXL | 4.2 |
| Max. Linear Ex./Xmax mm (inch) | 7 ± 3.5mm (0.28 ± 0.14) |
| Suspension Compliance CMS - mm/N | 1.1 |
| Electrical Q Factor QES | 0.56 |
| QTS | 0.44 |
| QMS | 2.08 |
| Mech. Resistance RMS- N . S / M | 1.5 |
| Moving Mass MMS - gr/ounce | 11 |
| Equiv. Can Air Load VAS - L (cu.ft3) | 21 (0.74) |
| Cone | Type One-piece formed |
| Cone | Material DPC |
| Unit Diameter mm(inch) | 165 (6.50) |
| Mounting Depth | mm (inch) 61 (2.40) |
| Mounting Cutout | 141 (5.55) |
| Net Weight Kg (lb) | 0.60 (1.32) |
More specs
| |
What's Included
- 2 x Morel Hybrid MW6 MKII
Morel
About the Morel Hybrid MW6 MKII
From our tech experts at CEN
The Morel Hybrid MW6 MKII is a pair of 6.5 inch component woofers rated at 140 W RMS and 600 W transient. They have one-piece DPC cones, 54 mm Hexatech aluminium voice coils and hybrid ferrite and neodymium motors, covering 35 Hz to 3 kHz at 4 ohms with 91 dB sensitivity.
Who it suits
Factory 6.5 inch door positions, and anyone building a Hybrid front stage. They are woofers only, so pair them with the Hybrid MT300 tweeters, or choose the complete Hybrid 62 system with crossovers.
Our tech experts advise
They need a 141 mm cut-out and 61 mm of depth. Use a crossover or DSP low-pass to hand over to the tweeter. Door deadening makes a clear difference to midbass. Get in touch.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Does the Morel MW6 MKII include tweeters?
A: No. The box contains 2 x Morel Hybrid MW6 MKII woofers only. Morel's Hybrid MT300 tweeter is designed to work with the Hybrid woofers.
Q: How much power can the MW6 MKII handle?
A: Each woofer is rated at 140W RMS (600W max transient), with a 4 ohm impedance and 91 dB sensitivity.
Q: What size hole does the MW6 MKII need?
A: The mounting cutout is 141mm and the mounting depth is 61mm.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →







































