


Couldn't Load Pickup availability
The Morel Sensus 62 is a 6.5-inch (165mm) 2-way component speaker system rated at 120W RMS, part of Morel's Sensus range. It pairs a DPC cone woofer with a 28mm Acuflex™ soft dome tweeter and a passive external crossover.
Key specifications
- Type: 2-way component set
- Woofer: 6.5" (165mm)
- Tweeter: 1.1" (28mm) silk soft dome
- Woofer cone: DPC (damped polypropylene composite)
- Power handling: 120W RMS, 300W max
- Sensitivity: 88dB (2.83V/1m)
- Frequency response: 40Hz–25kHz
- Crossover: passive external MXR230S, tweeter level 0/+3dB
- Impedance: 4 ohms
- Woofer mounting depth: approx. 64mm
- Included: woofer grilles and mounting hardware
Morel Sensus 62
The Sensus 62 features a 6.5-inch (165mm) woofer with a one-piece DPC cone and butyl rubber surround for natural, distortion-free low-end response. The 1.1-inch (28mm) Acuflex™ soft dome tweeter integrates smoothly with the woofer, delivering detailed highs and wide dispersion up to 25kHz.
The external MXR230S crossover network divides frequencies accurately between drivers and includes an adjustable tweeter level (0/+3dB) to match cabin acoustics. With 120W RMS power handling and 88dB sensitivity, the Sensus 62 performs reliably in a range of install environments. Want a dedicated midrange driver? The Morel Sensus 63 3-way system adds a 3.5-inch midrange unit to the same 6.5-inch platform.
Features
- 6.5" (165mm) woofer — one-piece DPC (Damped Polypropylene Composite) cone with butyl rubber surround for detailed, distortion-free low-end response.
- 28mm (1.1") Acuflex™ soft dome tweeter — Morel's proprietary damping compound delivers natural highs and smooth, fatigue-free listening up to 25kHz.
- Passive external crossover (MXR230S) — accurate frequency division with adjustable tweeter level (0/+3dB) to fine-tune output to your cabin.
- Shallow mounting depth of approx. 64mm for straightforward integration into most vehicle doors.
Explore the full range in 6.5 Inch Component Speakers.
Specification
| Woofer | 6.5” (165mm) DPC (damped polypropylene composite) cone, hybrid magnet motor |
|---|---|
| Tweeter | 1.1” (28mm) handcrafted silk soft dome tweeter |
| Power Handling | 120W RMS / 300W max |
| Frequency Response | 40 Hz – 25,000 Hz |
| Sensitivity | 88 dB (2.83V/1M) |
| Nominal Impedance | 4 Ohms |
| Mounting Depth | (Woofer) ~64mm |
More specs
| |
What's Included
- 2 × 6.5" Woofers
- 2 × 28mm Acuflex™ Dome Tweeters
- 2 × Passive External Crossovers
- 2 × Protective Grilles for Woofers
- Full Mounting Hardware
- User Manual & Installation Guide
Morel
About the Morel Sensus 62
From our tech experts at CEN
The Morel Sensus 62 is a 2-way component speaker set built around a 6.5 inch (165mm) DPC woofer and a 28mm Acuflex™ soft dome tweeter, rated at 120W RMS and 300W peak. It includes the passive external MXR230S crossover, woofer grilles, and full mounting hardware. Impedance is 4 ohms with 88dB sensitivity and a frequency range of 40Hz to 25kHz.
Who it suits
The Sensus 62 suits drivers who want a component speaker upgrade over factory-fit units and plan to position the tweeter separately for better sound staging. Those wanting a simpler coaxial installation may prefer the Morel Maximo Ultra 602 MKII coaxial; for a step up, consider the Morel Tempo Ultra 602 MKII.
Our tech experts advise
The woofer mounting depth is approximately 64mm, so measure your door cavity before ordering. The MXR230S crossover has a tweeter level switch at 0 or +3dB to fine-tune output to your cabin acoustics. Installation is priced per vehicle; see our Nottingham fitting service for details.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Can I adjust the tweeter level on the Sensus 62?
A: Yes. The passive external MXR230S crossovers have an optional +3dB tweeter boost to help match your cabin acoustics.
Q: What is the difference between the Sensus 62 and Sensus 63?
A: The Sensus 63 adds a dedicated 3.5-inch (90mm) midrange driver to the 6.5-inch woofer and soft dome tweeter, making it a 3-way system. The Sensus 62 is the 2-way set.
Q: What is in the box with the Sensus 62?
A: Two 6.5-inch woofers, two Acuflex dome tweeters, two passive external crossovers, two woofer grilles, full mounting hardware and a user manual and installation guide.
Q: How much power does the Morel Sensus 62 handle?
A: The Sensus 62 is rated at 120W RMS and 300W max, with a sensitivity of 88dB (2.83V/1m) and a frequency response of 40Hz to 25kHz.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
































