Shop All

Morel Hybrid MW5 MKII 5.25 Inch Component Woofers 120w RMS

£649.00 Out of stock
Out of Stock
SKU: 93391MPN: Hybrid MW5 MKII
Part of the range · 14 productsPart of the Morel Hybrid range · 14 products See the range →

The Morel Hybrid MW5 MKII are a pair of 5.25 inch component woofers, rated at 120W RMS, featuring a one-piece DPC cone, 54mm Hexatech aluminium voice coil and hybrid ferrite/neodymium magnet motor. They are part of the Morel Hybrid range, designed for building or upgrading a Hybrid component speaker system.

These are woofers only (no tweeters). Pair them with the Morel Hybrid MT300 tweeters, or choose the complete Morel Hybrid 52 component system.

Key specifications

  • Size: 5.25" (135mm unit diameter)
  • Impedance: 4 ohms
  • Power handling: 120W RMS, 500W max transient
  • Sensitivity: 89 dB (2.83 V/1m)
  • Frequency response: 45 – 3,000 Hz
  • Cone: one-piece DPC (damped polymer)
  • Motor: hybrid ferrite and neodymium, rear vented, 54mm (2.1") Hexatech voice coil
  • Mounting cutout: 120mm, mounting depth: 60mm
  • Supplied as: pair (2 x MW5 MKII)

Morel Hybrid MW5 MKII woofer

All Hybrid MW models incorporate Morel's core technologies. A 54mm (2.1") aluminium Hexatech external voice coil, wound on an aluminium former, enables stable, efficient and linear piston-like movement, reducing distortion.

Morel's one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, producing a realistic three-dimensional sound presentation.

The Hybrid woofer's suspension improves mechanical movement and membrane stability, contributing to very low distortion at high power and better low-frequency dynamic range.

Features

DPC Cone

DPC (Damped Polymer Cone) is a direct derivative of the cones Morel has built its reputation on. High self-damping characteristics deliver exceptional sound quality without colouration or harshness.

Hexatech Aluminium Voice Coil

Made from 100% aluminium wire shaped in a honeycomb formation, the Hexatech™ voice coil reduces air gaps in the coil windings and increases efficiency. Its low mass is a key reason for the fast transient response Morel drive units are known for.

Hybrid Magnet Motor

The Hybrid motor combines a ferrite magnet with a powerful neodymium magnet to create a compact, lightweight and powerful motor system. More amplified power is converted into sonic energy, delivering flawless performance even in a small driver.

Specification
Nominal Impedance (ohm)4
Power HandlingWrms 120
Max. Trans. Pwr Handling Wrms500
Sensitivity(2.83 V/1M) dB 89
Frequency responseHz 45 - 3000
Resonant Freq. Fs Hz56
Voice CoilDiameter mm (inch) 54 (2.1)
Voice CoilHeight mm (inch) 10.50 (0.41)
Voice CoilType/Former Aluminium
Voice CoilWire Hexatech™ Aluminium
DC Resistance (ohm)3
Voice CoilInduct. @1 kHz (mH) 0.21
MagnetSystem Hybrid rear vented
HE-Magnetic Gap Height mm (inch)4 (0.16)
B-Flux Density (T)0.83
BL Product/BXL4.2
Max. Linear Ex./Xmax mm (inch)7 ± 3.5mm (0.28 ± 0.14)
Suspension Compliance CMS - mm/N0.78
Electrical Q Factor QES0.59
QTS0.45
QMS1.8
Mech. Resistance RMS- N . S / M1.96
Moving Mass MMS - gr/ounce9.9
Equiv. Can Air Load VAS - L (cu.ft3)8.87 (0.31)
ConeType One-piece formed
ConeMaterial DPC
Unit Diameter mm(inch)135 (5.25)
Mounting Depthmm (inch) 60 (2.36)
Mounting Cutout120 (4.72)
Net Weight Kg (lb)0.60 (1.32)
More specs
  • Effective Piston Area SD sq.cm (sq.inch): 90 (13.95)
What's Included
  • 2 x Morel Hybrid MW5 MKII
Product information

Morel

About the Morel Hybrid MW5 MKII

From our tech experts at CEN

The Morel Hybrid MW5 MKII is a pair of 5.25 inch component woofers rated at 120 W RMS and 500 W transient. They have one-piece DPC cones, 54 mm Hexatech aluminium voice coils and hybrid ferrite and neodymium motors, covering 45 Hz to 3 kHz at 4 ohms.

Who it suits

Cars with 5.25 inch door openings, and anyone building or repairing a Hybrid front stage. They are woofers only, so pair them with the Hybrid MT300 tweeters, or choose the complete Hybrid 52 system with crossovers.

Our tech experts advise

They need a 120 mm cut-out and 60 mm of depth. Use a crossover or DSP low-pass to hand over to the tweeter, and seal the door for better midbass. Get in touch and we will confirm what your doors take.

Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Does the Morel MW5 MKII include tweeters?

A: No. The box contains 2 x Morel Hybrid MW5 MKII woofers only. Morel's Hybrid MT300 tweeter is designed to work with the Hybrid woofers.

Q: How much power can the MW5 MKII handle?

A: Each woofer is rated at 120W RMS (500W max transient), with a 4 ohm impedance and 89 dB sensitivity.

Q: What size hole does the MW5 MKII need?

A: The mounting cutout is 120mm and the mounting depth is 60mm.