



Morel Hybrid MW4 MKII 4 Inch Component Woofers 100w RMS
Couldn't Load Pickup availability
The Morel Hybrid MW4 MKII is a pair of 4 inch component woofers rated at 100W RMS, featuring a one-piece DPC cone, 54mm Hexatech aluminium voice coil, and hybrid ferrite/neodymium magnet motor. They are part of the Morel Hybrid range, designed for building or upgrading a Hybrid component speaker system.
These are woofers only (no tweeters). Pair them with the Morel Hybrid MT300 tweeters, or choose the complete Morel Hybrid 42 component system.
Key specifications
- Size: 4" (109mm unit diameter)
- Impedance: 4 ohms
- Power handling: 100W RMS, 300W max transient
- Sensitivity: 89 dB (2.83 V/1m)
- Frequency response: 50 – 4,200 Hz
- Cone: one-piece DPC (damped polymer)
- Motor: hybrid ferrite and neodymium, rear vented, 54mm (2.1") Hexatech voice coil
- Mounting cutout: 93mm
- Supplied as: pair (2 x MW4 MKII)
Morel Hybrid MW4 MKII woofer
All Hybrid MW models incorporate Morel's core technologies. The 54mm (2.1") aluminium Hexatech external voice coil is wound on an aluminium former, enabling stable, efficient and linear piston-like movement that reduces distortion.
Morel's one-piece DPC cone forms a flat geometric plane that improves sound dispersion and dynamics, creating a realistic three-dimensional sound presentation.
The Hybrid woofer's suspension improves the mechanical movement and stability of the membrane, contributing to very low distortion at high power and better low-frequency dynamic range.
Features
DPC Cone
DPC (Damped Polymer Cone) is a direct derivative of the cones Morel has built its reputation on. High self-damping characteristics deliver exceptional sound quality without colouration or harshness.
Hexatech Aluminium Voice Coil
Made from 100% aluminium wire shaped like a honeycomb, the Hexatech™ voice coil reduces air gaps in the coil windings to increase efficiency. Its lightweight construction is largely responsible for the fast transient response Morel drive units are known for.
Hybrid Magnet Motor
The Hybrid motor combines a ferrite magnet with a powerful neodymium magnet to create a compact, lightweight and powerful motor system. More amplified power is converted into sonic energy, delivering flawless performance even in a small driver.
Explore the full range in Morel Hybrid.
Specification
| Nominal Impedance (ohm) | 4 |
|---|---|
| Power Handling | Wrms 100 |
| Max. Trans. Pwr Handling Wrms | 300 |
| Sensitivity | (2.83 V/1M) dB 89 |
| Frequency response | Hz 50-4200 |
| Resonant Freq. Fs Hz | 82 |
| Voice Coil | Diameter mm (inch) 54 (2.1) |
| Voice Coil | Height mm (inch) 10.50 (0.41) |
| Voice Coil | Type/Former Aluminium |
| Voice Coil | Wire Hexatech™ Aluminium |
| DC Resistance (ohm) | 3.2 |
| Voice Coil | Induct. @1 kHz (mH) 0.21 |
| Magnet | System Hybrid rear vented |
| HE-Magnetic Gap Height mm (inch) | 4 (0.16) |
| B-Flux Density (T) | 0.83 |
| BL Product/BXL | 4.16 |
| Max. Linear Ex./Xmax mm (inch) | 7 ± 3.5mm (0.28 ± 0.14) |
| Suspension Compliance CMS - mm/N | 0.57 |
| Electrical Q Factor QES | 0.63 |
| QTS | 0.46 |
| QMS | 1.74 |
| Mech. Resistance RMS- N . S / M | 1.98 |
| Moving Mass MMS - gr/ounce | 6.8 |
| Equiv. Can Air Load VAS - L (cu.ft3) | 3.17 (0.11) |
| Cone | Type One-piece formed |
| Cone | Material DPC |
| Unit Diameter mm(inch) | 109 (4.3) |
| Mounting Depth | mm (inch) 28.5 (1.12) |
| Mounting Cutout | 93 (3.6) |
| Net Weight Kg (lb) | 0.53 (1.1716) |
More specs
| |
What's Included
- 2 x Morel Hybrid MW4 MKII
Morel
About the Morel Hybrid MW4 MKII
From our tech experts at CEN
The Morel Hybrid MW4 MKII is a pair of 4 inch component woofers rated at 100 W RMS and 300 W transient. They have one-piece DPC cones, 54 mm Hexatech aluminium voice coils and hybrid ferrite and neodymium motors, covering 50 Hz to 4.2 kHz at 4 ohms.
Who it suits
Cars with 4 inch door or dash positions, and anyone building a Hybrid front stage. They are woofers only, so pair them with the Hybrid MT300 tweeters, or choose the complete Hybrid 42 system with crossovers.
Our tech experts advise
They need a 93 mm cut-out and have a 109 mm unit diameter. Use a crossover or DSP low-pass to hand over to the tweeter. Sensitivity is 89 dB, so an amplifier helps them reach their best. Get in touch.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Does the Morel MW4 MKII include tweeters?
A: No. The box contains 2 x Morel Hybrid MW4 MKII woofers only. Morel's Hybrid MT300 tweeter is designed to work with the Hybrid woofers.
Q: How much power can the MW4 MKII handle?
A: Each woofer is rated at 100W RMS (300W max transient), with a 4 ohm impedance and 89 dB sensitivity.
Q: What size hole does the MW4 MKII need?
A: The mounting cutout is 93mm.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →




































