Shop All

Kicker 48KXMA8008 KXM Marine 8 Channel Amplifier 800w RMS

£809.95
Low stock
SKU: 93669MPN: 48KXMA8008
Part of the range · 47 productsPart of the Kicker Marine range · 47 products See the range →

The Kicker 48KXMA8008 is a KXM Series marine 8-channel Class D amplifier delivering 800W RMS total. It outputs 50W x 8 at 4 ohms, 100W x 8 at 2 ohms, or 200W x 4 bridged, with KickEQ bass boost across all four amp sections.

Key specifications

  • Channels: 8 (bridgeable)
  • Amplifier class: D
  • RMS power: 50W x 8 @ 4Ω / 100W x 8 @ 2Ω / 200W x 4 @ 4Ω bridged
  • Crossover: Variable 24dB, high-pass / low-pass / band-pass
  • Bass boost: KickEQ variable 0 to 6dB at 40Hz (amps 1 to 4)
  • Fuse rating: 120A (4 AWG power cable)
  • Turn-on: Signal sensing / DC offset / audio
  • Frequency response: 10Hz to 20kHz
  • Dimensions: 5.5 x 37.4 x 21 cm

KXM Marine 800W 8 Channel Class D Full-Range Amplifier (48KXMA8008)

The KXMA 800W 8-channel amplifier is a flexible marine power solution, delivering up to 100W into eight full-range channels or 200W into four bridged channel pairs.

Kicker's Real Marine standard means this amplifier is purpose-built for use on the water. Every KXMA and KMA Series amp includes anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. All units are tested to meet or exceed marine industry standards for UV, humidity and saltwater exposure.

Gain, crossover and bass-boost controls sit behind a gasket-sealed panel for water resistance. KickEQ™ provides up to 6dB of bass boost with a single knob. The variable 24dB crossover lets you tune your system quickly, and a full-range RCA output lets you add a second amplifier without running new signal cable to your KICKER KMC Media Center.

Features

  • Class D amplifier
  • Gain control with "Gain Match" LED indicator
  • FIT2™ (Fail-safe Integration Technology) circuitry
  • Variable 24dB crossover
  • DSP-controlled preamp
  • KickEQ™ 6dB variable bass boost
  • ABYC/NMMA-compliant power terminals
  • Conformal-coated circuit boards
  • Easy access to settings behind gasket-sealed cover panel
  • Black anodised aluminium chassis
  • Top-mounted teal LED light pipe
  • Stainless-steel mounting hardware included
Specification
RMS Power @ 14.4V50W x 8 @ 4Ω / 100W x 8 @ 2Ω / 200W x 4 @ 4Ω Bridged
Output Channels8
Voltage (V)12
ClassD
FeaturesKickEQ Bass Boost / FIT2 Technology
KickEQ™ BOOSTVariable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4)
Waterproof RatingASTM B117 200 hr Salt Fog Test Compliant
FilterHigh-Pass / Low-Pass / Band-Pass
Fuse Rating (A)120
Cable Gauge (AWG)4
Amp Turn-OnSignal Sensing / DC Offset / Audio
Frequency Response(Hz) 10-20k
Signal-to-Noise Ratio (dB)95
Input Channels8
Input TypeHigh Level / Low Level
Input Sensitivity Low Level125mV-5V
Input Sensitivity High Level250mV-10V
Height (cm)5.5
Width (cm)37.4
Depth (cm)21
What's Included
  • Kicker 48KXMA8008
Product information

Kicker

About the Kicker 48KXMA8008

From our tech experts at CEN

A marine-rated amplifier, 8 channel, rated at 800w RMS, coated to cope with damp and salt air where a car amplifier would corrode.

Who it suits

Boats, ribs and open builds, and anywhere an amplifier is mounted somewhere it will get damp. Campers with outdoor speakers are an increasingly common use.

Our tech experts advise

Mount it somewhere ventilated and as dry as the boat allows, and fuse the feed at the battery. Marine wiring wants tinned cable and sealed joints. get in touch to talk through the install. See car audio installation.

Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Kicker News & Guides

The latest Kicker product news, launches and guides from the CEN team in Nottingham.

Frequently Asked Questions

Q: How much power does the Kicker 48KXMA8008 deliver?

A: It delivers 50W RMS x 8 at 4 ohms or 100W RMS x 8 at 2 ohms, measured at 14.4V.

Q: Can the 48KXMA8008 be bridged?

A: Yes. Bridged into 4 ohms it delivers 200W RMS x 4.

Q: Is the 48KXMA8008 suitable for use on a boat?

A: Yes. KXMA amplifiers are built to the KICKER Real Marine standard, with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards, ABYC/NMMA-compliant power connections and ASTM B117 200 hour salt fog test compliance. The gain, crossover and bass boost controls sit behind a gasket-sealed cover panel.

Q: Can CEN install this amplifier?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.