Shop All

Kicker 48KXMA5004 KXM Marine 4 Channel Amplifier 500w RMS

£499.95 Out of stock
Out of Stock
SKU: 93668MPN: 48KXMA5004

KXM Marine 500W 4 Channel Class D Full-Range Amplifier

48KXMA5004

KXMA Amps are built for the outdoors. Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls.

The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."

KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center.

Features

  • Class D Amplifier
  • Gain Control With "Gain Match" LED Indicator
  • FIT2™ (Fail-safe Integration Technology) Circuitry
  • Variable 24dB Crossover
  • DSP-Controlled Preamp
  • KickEQ™ 6dB Variable Bass Boost
  • ABYC/NMMA-Compliant Power Terminals
  • Conformal-Coated Circuit Boards
  • Easy Access to Settings behind Gasket-Sealed Cover Panel
  • Black Anodized Aluminum Chassis
  • Top-Mounted, Teal LED Light Pipe
  • Stainless-Steel Mounting Hardware Included

This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels.

    Specification
    RMS Power @ 14.4V75W x 4 @ 4Ω / 125W x 4 @ 2Ω / 250W x 2 @ 4Ω Bridged
    Output Channels4
    Voltage (V)12
    ClassD
    FeaturesKickEQ Bass Boost / FIT2 Technology
    KickEQ™ BOOSTVariable 0-6dB, centered @ 40Hz (Only on amp 2)
    Waterproof RatingASTM B117 200 hr Salt Fog Test Compliant
    FilterHigh-Pass / Band-Pass
    Amp Turn-OnSignal Sensing / DC Offset / Audio
    Frequency Response(Hz) 10-20k
    Signal-to-Noise Ratio (dB)95
    Input Channels4
    Input TypeHigh Level / Low Level
    Input Sensitivity Low Level125mV-5V
    Input Sensitivity High Level250mV-10V
    Height (cm)5.5
    Width (cm)28.4
    Depth (cm)21
    What's Included
    • Kicker 48KXMA5004
    Product information

    About the brand

    Kicker

    Known for their durability and high-quality sound, Kicker products are designed to enhance the audio experience in various environments. The brand's commitment to research and development has led to numerous patented technologies that improve sound clarity and bass performance, making it a favorite among audiophiles and professional installers alike.

    Overall, Kicker Electronics has built a strong legacy in the audio industry through its relentless pursuit of innovation, quality, and customer-centric values, making it a leading name in high-performance audio solutions worldwide.

    Shop Kicker

    Recommended For You

    Discover more top-rated gear, handpicked to go with what you're viewing

    Looking for Installation?

    At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

    Get a quote

    Frequently Asked Questions

    Q: Will these speakers fit my car?

    A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

    Q: Do I need an amplifier to run these speakers?

    A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

    Q: What is the difference between coaxial and component speakers?

    A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

    Q: Do these come as a pair?

    A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

    Q: Can CEN fit these speakers for me?

    A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.