



Edge Street Series EDSPRO8-E3 Pro Audio Midrange Speakers 8 Inch 225w RMS Pair
Couldn't Load Pickup availability
The Edge EDSPRO8-E3 is a pair of 8 inch (200mm) pro audio midrange speakers rated at 225W RMS (450W peak) each, with 98dB sensitivity and an 80Hz–20kHz frequency response. They are part of the Edge Street Series range.
This listing is the Street Series EDSPRO8-E3. The Edge pro audio midrange 8 inch speaker is also available as the Edge DB Series EDBPRO8-E3 at 175W RMS.
Key specifications
- Model: EDSPRO8-E3
- Type: 1 way pro audio midrange
- Size: 8" (200mm)
- Power: 225W RMS / 450W peak
- Sensitivity: 98dB
- Frequency response: 80Hz–20kHz
- Impedance: 4 ohms
- Mounting depth: 85mm, mounting diameter: 183mm
EDGE Street Series 8 inch 450 watts Pro Audio Midrange Speakers - Pair
The Street Series is built with an enhanced magnet structure and larger voice coil, delivering increased power handling and a wide frequency response suited to reproducing vocals at high volume. Top-grade ferrite magnets, copper voice coils and carefully crafted soft parts combine high-volume output, wide frequency range and clarity.
WIDE RANGE - Extends to 20kHz, giving virtually full-range performance without the need for additional high-range drivers. For extra top end, these pair naturally with Street Series tweeters such as the EDSPRO22T-E3.
HIGH EFFICIENCY - A 98dB sensitivity rating delivers powerful sound levels while using power efficiently.
CLEAR SOUND - Wide bandwidth allows clear, responsive sound reproduction from the mids, with good balance from a single source even at high SPL.
BEST POWER - At 225W RMS per driver, these speakers deliver serious output.
Features
- Non pressed composite cone
- Copper voice coil winding
- Dual roll foam surround
- Polycotton spiders
- Spade terminal for easy connection
- EVA gasket with custom Edge branding
Explore the full range in Edge Street Series.
Specification
| Type | Pro Audio Midrange |
|---|---|
| Configuration | 1-Way |
| Speaker Size | 8" (200mm) |
| RMS Power | 225 watts |
| Peak Power | 450 watts |
| Sensitivity | 98dB |
| Frequency response | 80Hz - 20kHz |
| Impedance | 4 Ohms |
| Mounting Depth | 3.3" (85mm) |
| Mounting Diameter | 7.3" (183mm) |
What's Included
- EDSPRO8-E3
Edge
About the Edge EDSPRO8-E3
From our tech experts at CEN
Edge pro audio midrange drivers, 8 inch, handling 225w RMS, built for efficiency and output rather than background listening.
Who it suits
Loud builds and show cars, where efficiency is what makes a system go loud without enormous amplifier power.
Our tech experts advise
Pro drivers usually need baffle or pod mounting and a crossover set well clear of their limits; they are not a straight door swap. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Edge range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Can the EDSPRO8-E3 be used without tweeters?
A: Yes. Its wide 80Hz to 20kHz response means it can play virtually full range without additional high range drivers, though tweeters can be added for extra top end.
Q: How loud is the EDSPRO8-E3?
A: It has a sensitivity of 98dB and handles 225W RMS (450W peak) per speaker at 4 ohms.
Q: What is the mounting depth of the EDSPRO8-E3?
A: The mounting depth is 3.3 inches (85mm) and the mounting diameter is 7.3 inches (183mm).
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →




































