Edge DB Series EDBPRO6-E3 Pro Audio Midrange Speakers 6.5 Inch 150w RMS Pair
Couldn't Load Pickup availability
The Edge EDBPRO6-E3 is a 6.5 inch pro audio midrange speaker rated at 150W RMS (300W peak) with 98dB sensitivity, sold as a pair. It is part of the Edge DB Series — Edge's entry-level pro audio range.
This listing is the 6.5 inch. The DB Series Pro Audio Midrange is also available in the 8 inch EDBPRO8-E3 (175W RMS).
Key specifications
- Size: 6.5 inch
- Type: pro audio midrange, 1 way
- RMS power: 150W
- Peak power: 300W
- Sensitivity: 98dB
- Frequency response: 125Hz – 10.5kHz
- Impedance: 4 ohms
- Sold as a pair
EDBPRO6-E3 pro audio midrange
The DB Series is Edge's entry-level pro audio speaker range, built to deliver high-volume midrange output across multiple speaker sizes. Specially engineered voice coils and motors are used throughout to achieve high efficiency and wide frequency response.
Cone technology: the EDBPRO6-E3 uses a "golf ball" design cone that improves rigidity and strength of the paper cone, adds a small increase in cone area for extra output, and pairs custom tooled dust caps with special cone materials.
High efficiency: at 98dB sensitivity, this midrange is capable of concert-level volume output.
Pro audio sound: wide frequency response combined with high sensitivity and 150W RMS power handling make the EDBPRO6-E3 an affordable entry point into pro audio.
Features
- Non pressed paper cone
- Dual roll foam surround
- Poly cotton spiders
- Spade terminal
- EVA gasket
Explore the full range in Edge DB Series.
Specification
| Configuration | 1 way |
|---|---|
| Speaker Size | 6.5" (165mm) |
| RMS Power | 150 watts |
| Peak Power | 300 watts |
| Sensitivity | 98dB |
| Frequency Response | 125Hz - 10.5kHz |
| Impedance | 4 Ohms |
| Recommended Amplifier | EDBX200.4-E1 |
What's Included
- EDBPRO6-E3
Edge
About the Edge EDBPRO6-E3
From our tech experts at CEN
Edge pro audio midrange drivers, 6.5 inch, handling 150w RMS, built for efficiency and output rather than background listening.
Who it suits
Loud builds and show cars, where efficiency is what makes a system go loud without enormous amplifier power.
Our tech experts advise
Pro drivers usually need baffle or pod mounting and a crossover set well clear of their limits; they are not a straight door swap. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Edge range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Edge
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from Edge DB Series
More options from the same range, in stock and ready to go
Best SellerEdge 12 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB12A 300w RMS
RRP £159.00Save 6%£149.00
Edge 10 Inch Active Bass Box Sub Subwoofer Ported Enclosure EDB10A 250w RMS
RRP £149.00Save 6%£139.00
Edge DB Series EDB1000.1D-E4 Amp Class D 1 Channel Monoblock Amplifier 1000w RMS
£149.99
Best SellerEdge DB Series EDB1TN-E1 Component Dome Tweeters 1.8 Inch 25w RMS Pair
£19.99
Edge DB Series EDBPRO8-E3 Pro Audio Midrange Speakers 8 Inch 175w RMS Pair
£64.99
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: What frequency range does the EDBPRO6-E3 cover?
A: It is rated at 125Hz to 10.5kHz, so it is a midrange driver and should be paired with tweeters for the high frequencies and a subwoofer for bass.
Q: Which amplifier does EDGE recommend for the EDBPRO6-E3?
A: EDGE recommends the EDBX200.4-E1 4 channel amplifier. Each speaker handles 150W RMS and 300W peak at 4 ohms.
Q: How sensitive is the EDBPRO6-E3?
A: It has a sensitivity of 98dB, so it plays loud from modest amplifier power.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →