Shop All

Alpine SPC-106CRA2 Plug & Play Front Component Speakers for VW Crafter & MAN TGE

RRP £429.99 £419.99 Save 2%
Low stock
SKU: 90066MPN: SPC-106CRA2
Part of the range · 13 productsPart of the Alpine Plug & Play range · 13 products See the range →

The Alpine SPC-106CRA2 is a plug-and-play 16.5cm front component speaker system for the Volkswagen Crafter 2 and MAN TGE (2017 onwards), part of Alpine's Adventure Audio range. It features 28mm back-chambered silk dome tweeters in photo-etched stainless steel A-pillar grilles, 60W RMS power handling, and original VW connectors for fast, tool-friendly installation.

For more power and bass, the system can be upgraded to the Concert Ensemble with the SPC-W84ACRA2-2 6-channel DSP amplifier and subwoofer.

Key specifications

  • Woofers: 16.5cm (166mm) mid-range door speakers, 25mm voice coil
  • Tweeters: 28mm back-chambered silk dome, neodymium magnet
  • Power handling: 60W RMS
  • Frequency response: 45Hz – 25kHz
  • Impedance: 4 ohms
  • Sensitivity: 89dB
  • Fit: Plug and play with original VW wiring harness
  • Vehicles: VW Crafter 2 Panel Van, Minibus and Grand California, MAN TGE (2017 onwards)

Alpine Adventure Audio SPC-106CRA2 — front speaker system for VW Crafter 2 & MAN TGE

16.5cm front component speaker system for Volkswagen Crafter 2 & MAN TGE

Upgrade your Volkswagen Crafter 2 or MAN TGE with the SPC-106CRA2 high-end component speaker system from Alpine's Adventure Audio range.

The system unites function with form: audiophile-grade sound quality alongside photo-etched stainless steel tweeter grilles that sit neatly in your A-pillars.

The high-end tweeters reproduce every note with clarity and fast dynamics, while the 16.5cm mid-range door speakers cover a wide frequency range — delivering powerful mid-bass with texture and accuracy across every audio track.

Original VW connectors and use of the factory wiring harness make installation fast and straightforward. The system is also compatible with the front windscreen roller blinds fitted in the VW Crafter 2 Grand California.

Your VW Crafter 2 never sounded this good

The Alpine SPC-106CRA2 brings high-fidelity audio to your Volkswagen Crafter 2 at an affordable cost. From deep bass to accurate mids and crisp highs, the system delivers an audiophile listening experience throughout the cabin.

Made for Volkswagen Crafter 2 & MAN TGE

The SPC-106CRA2 is compatible with all Volkswagen Crafter 2 configurations — Grand California, panel van and minibus — as well as the MAN TGE. It works with any original or aftermarket head unit and is compatible with the Crafter 2 Grand California front windscreen roller blinds.

Designed to be seen and heard

The stainless steel tweeter grilles in the A-pillars replace the original plastic VW grilles. A chemical photo-etching process is used for both aesthetic and acoustic performance, making the grilles visually striking from every angle while remaining virtually transparent to passing sound waves.

Fast & easy installation

All speaker components fit only original installation locations, preserving the option to reinstate the factory system — useful if you drive a leased vehicle. All connectors are plug-and-play compatible with the original VW wiring harness. Installation can be completed with standard household tools in a short time, and a step-by-step installation manual is included.

Enjoy crisp, clean highs

The 28mm silk dome tweeters feature back-chambers for crisp, clean high-frequency reproduction with fast dynamics. Audio-optimised tweeter mounting brackets in the A-pillars angle the tweeters directly towards listeners in the cabin, improving sound stage and clarity.

High-end silk dome tweeters

The 28mm tweeters deliver extended high-frequency response well beyond 25kHz, faithfully reproducing the sound stage and harmonic details of the music across the Adventure Audio range.

Dynamic mid-bass experience

The Alpine-designed mid-range door speakers produce a wide frequency range, uncovering the rich details of every audio track with powerful mid-bass, texture and accuracy. Included steel base rings provide a solid, vibration-free connection to the doorframe, and attached silicone seals protect the door interior from moisture.

Specification
Peak Power180 Watts
RMS Power60 Watts
Frequency response45Hz – 25kHz
Impedance4 Ohms
Sensitivity89dB 1W/W
More specs
  • 166 mm mid-range door speaker
  • Includes steel plates for solid door installation and adaptation to original door cut-out
  • High quality steel basket and rubber surround
  • 25 mm voice coil
  • Large Ferrite magnet
  • Includes foam seal ring
  • For easy installation with original VW cable harness (original connectors)
  • 28 mm audiophile-grade back-chambered silk-dome tweeters
  • Neodymium magnet
  • Stainless steel tweeter grills (photo etched)
  • Acoustically optimized tweeter installation brackets
  • Integrate speaker network with foil condenser
  • Power Handling
  • Volkswagen    Crafter 2 Panel Van    2017 →
  • Volkswagen    Crafter 2 Minibus    2017 →
  • Volkswagen    Crafter 2 Grand California    2017 →
  • MAN    TGE    2017 →
What's Included
  • Woofers
  • Tweeters
  • Installation brackets
Product information

Alpine

About the Alpine SPC-106CRA2

From our tech experts at CEN

Vehicle-specific speakers designed for the VW Crafter and MAN TGE, so they fit the factory locations using the existing mounting points and connectors rather than needing adapter rings cut to fit.

Who it suits

VW Crafter and MAN TGE owners who want a real improvement over the factory speakers with no cutting or fabrication. Plug-and-play sets like this are the usual starting point, because the work is contained and the result is immediate.

Our tech experts advise

They will play louder and cleaner with an amplifier behind them, and doors usually benefit from sound deadening before you hear what the speakers can really do. Model years and trim levels vary, so get in touch to confirm this set suits your exact vehicle. See car audio installation.

Explore the full Alpine range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Alpine

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Which vehicles does the SPC-106CRA2 fit?

A: The Volkswagen Crafter 2 Panel Van, Minibus and Grand California, and the MAN TGE, from 2017 onwards. It works with original or aftermarket radios.

Q: Do I need to cut any wiring to fit the SPC-106CRA2?

A: No. All connectors are plug and play with the original VW wiring harness, and the speakers use the original mounting locations, so the factory system can be re-installed later.

Q: Is the SPC-106CRA2 compatible with the Grand California windscreen blinds?

A: Yes. It is compatible with the front windscreen roller blinds in the Crafter 2 Grand California.