



Vibe Powerbox 1500.1P-V0 Amp Class D Full Range Monoblock Amplifier 1500w RMS
Couldn't Load Pickup availability
The Vibe Powerbox 1500.1P-V0 is a full-range Class D monoblock amplifier delivering 1500W RMS at 1 ohm, 650W at 2 ohms and 400W at 4 ohms. It uses Full Bridge topology and is part of Vibe's Powerbox Pro range.
This listing is the 1500W model. The Powerbox Pro full-range mono range is also available as the Vibe Powerbox 5000.1P-V0.
Key specifications
- Channels: 1 (full-range mono)
- RMS at 1 ohm: 1500W
- RMS at 2 ohms: 650W
- RMS at 4 ohms: 400W
- Maximum power: 3000W
- Frequency response: 15Hz–50kHz
- Crossover: LP/HP/Flat, 15Hz–80Hz
- Dimensions (H x W x D): 66 x 172 x 233mm
- Topology: Full-range Class D with Full Bridge technology
Powerbox 1500.1P-V0 monoblock amplifier
The Powerbox Pro range was designed to power Vibe's Pro audio speakers and subwoofers. Because it is full range, the 1500.1P-V0 can drive subwoofers, midrange drivers or high-frequency speakers — including any sub from Vibe's subwoofer range.
- Full-range mono amplifier
- 1500W RMS
- 1 ohm stable
- Compact footprint
- Built-in active crossovers
- Bass boost circuit
- Ultra-efficient Class D topology
- Wideband frequency response up to 50kHz
- Full Bridge technology
Full Bridge technology originated in Japan and has been widely adopted in Brazil for high-output party and sound clash systems over the past decade. It is more efficient than traditional Class D, allowing Vibe to reduce the amplifier's physical footprint without sacrificing power. All models in the Powerbox Pro mono line deliver full-range frequency output, making them suitable for low, mid or high-frequency drivers.
Explore the full range in Vibe Powerbox Amplifiers.
Specification
| Dimensions | (H x W x D) 2.6” x 6.8” x 9.2” (66 x 172 x 233mm) |
|---|---|
| Frequency Response | 15Hz - 50kHz |
More specs
| |
What's Included
- Vibe POWERBOX1500.1P-V0 Vibe 3000 Watts Full range Monoblock Amplifier
Vibe
About the Vibe POWERBOX1500.1P-V0
From our tech experts at CEN
A monoblock subwoofer amplifier from Vibe’s Powerbox range, Class D, rated at 1500w RMS.
Who it suits
Anyone adding a subwoofer that needs real power behind it. Powerbox is Vibe’s long-running amplifier line, known for compact chassis.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: Can the Powerbox 1500.1P-V0 power speakers as well as subwoofers?
A: Yes. It is a full range amplifier with a 15Hz to 50kHz frequency response and LP/HP/flat crossover, so it can drive low, mid or high frequency drivers.
Q: What is the lowest impedance the Powerbox 1500.1P-V0 can run?
A: It is 1 ohm stable and delivers 1500W RMS at 1 ohm.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Amplifiers
What Is a DSP? In-Car Sound Processing Explained
Read the guide →
Amplifiers
New at CEN: Helix Next DSP Ultra XT — The New Flagship of In-Car Processing
Read more →
Amplifiers
Car Amplifier Buying Guide: Channels, Power and Matching Explained
Read the guide →
Amplifiers
The FiiO K15 DAC and Headphone Amplifier
Read more →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →




































