Shop All

Option Audio AIR-F8 D2 Sub 8 Inch Dual Voice Coil Flat Subwoofer 200w RMS

£179.00
Low stock
SKU: 92904MPN: AIR-F8 D2
Part of the range · 11 productsPart of the Option Audio AIR Series · 11 products See the range →

The Option Audio AIR-F8 D2 is a 20cm (8in) shallow-mount dual voice coil flat subwoofer rated at 200W RMS, from the Option Audio AIR-F flat subwoofer range. It uses a neodymium magnet and installs at just 4.3cm depth, making it suited to vehicles where space for a conventional subwoofer is not available.

This listing is the 8in model. The AIR-F flat subwoofer range is also available in AIR-F6 D2 6.5in (150W RMS).

Key specifications

  • Size: 20cm (8in)
  • Installation depth: 4.3cm
  • Voice coil: dual, 2 ohm + 2 ohm (wire to 1 ohm or 4 ohm)
  • Power handling: 200W RMS
  • Magnet: neodymium
  • Membrane: coated
  • Basket: plastic with fibreglass reinforcement
  • Type: single chassis (driver only)

Option Audio AIR-F8 D2 Subwoofer

The AIR-F8 D2 is built for car audio installations where space is tight. Its 4.3cm shallow mounting depth allows fitment in vehicles that cannot accommodate a conventional subwoofer, while the 200W RMS power handling delivers deep, impactful bass.

The neodymium magnet keeps weight low without sacrificing efficiency. The dual voice coil configuration offers wiring flexibility — connect to 1 ohm or 4 ohm to suit your amplifier.

Specification
Diameter20 cm
TypeSingle Chassis
Voice CoilDouble voice coil
Load Capacity200w RMS
Impedance2 Ohm+2 Ohm (1 Ohm or 4 Ohm)
Installation depth4.3cm
MagnetNeodymium
MembraneCoated
BasketPlastic with fibreglass reinforcement
What's Included
  • Option Audio AIR-F8 D2 Subwoofer
Product information

Option Audio

About the Option Audio AIR-F8 D2

From our tech experts at CEN

The Option Audio AIR-F8 D2 is an 8 inch shallow-mount dual voice coil flat subwoofer rated at 200W RMS. Its 4.3cm installation depth makes it suited to vehicles where a conventional subwoofer will not fit. The neodymium magnet keeps weight low without sacrificing efficiency.

Who it suits

This sub suits drivers who want genuine bass but have limited mounting space in their vehicle. The dual voice coil configuration wires to either 1 ohm or 4 ohm, giving useful flexibility when matching an amplifier. For a more compact option, see the AIR-F6 D2 6.5 inch 150W RMS flat sub.

Our tech experts advise

The AIR-F8 D2 is a bare driver only — it requires a separate enclosure or a custom-built baffle. Confirm your amplifier's rated output matches the wiring impedance you choose before purchasing. Fitting costs vary per vehicle; visit our Nottingham car audio installation page for details.

Explore the full Option Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Option Audio

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: Can the AIR-F8 D2 be wired to 1 ohm or 4 ohms?

A: Yes. It has dual 2 ohm voice coils, which can be wired to give a 1 ohm or 4 ohm load to suit your amplifier.

Q: Does the AIR-F8 D2 come with an enclosure?

A: No. It is supplied as a single subwoofer chassis (driver only), ready to install in a suitable enclosure or space.

Q: How much power can the AIR-F8 D2 handle?

A: It is rated at 200W RMS, delivering deep bass from a shallow 8-inch design.

Q: What is the installation depth of the AIR-F8 D2?

A: The AIR-F8 D2 needs just 4.3cm of installation depth, so it suits vehicles with very limited space.