Shop All

Option Audio AIR-8 D2 Sub 8 Inch Dual Voice Coil Subwoofer 200w RMS

£129.99
Low stock
SKU: 92900MPN: AIR-8 D2
Part of the range · 11 productsPart of the Option Audio AIR Series · 11 products See the range →

The Option Audio AIR-8 D2 is an 8-inch (20cm) dual voice coil car subwoofer with 2+2 ohm coils and 200W RMS power handling, from Option Audio's AIR subwoofer range.

This listing is the AIR-8 D2 8in. The Option Audio AIR range is also available in AIR-6 D2 6.5in (150W RMS) and AIR-F6 D2 6.5in flat profile (150W RMS).

Key specifications

  • Size: 20cm (8in)
  • Voice coil: dual, 2 ohm + 2 ohm
  • Power handling: 200W RMS
  • Mounting depth: 7.6cm
  • Magnet: ferrite
  • Impedance options: 1 ohm or 4 ohm
  • Cone: coated membrane
  • Basket: plastic with fibreglass reinforcement

Option Audio AIR-8 D2 Subwoofer

The AIR-8 D2 uses a dual voice coil and ferrite magnet to deliver deep, controlled bass. The 20cm driver suits a wide range of enclosures and vehicles, with a universal chassis design that keeps installation straightforward.

The dual 2 ohm coils give you wiring flexibility, letting you run the driver at 1 ohm or 4 ohm to match your amplifier. The coated membrane cone and fibreglass-reinforced plastic basket are built for consistent, long-term performance.

Specification
Diameter20cm
TypeSingle Chassis
Voice CoilDouble voice coil
Load Capacity200w RMS
Impedance2 Ohm+2 Ohm (1 Ohm or 4 Ohm)
Installation Depth7.6cm
MagnetFerrite
MembraneCoated
BasketPlastic with fibreglass reinforcement
What's Included
  • Option Audio AIR-8 D2 Subwoofer
Product information

Option Audio

About the Option Audio AIR-8 D2

From our tech experts at CEN

The Option Audio AIR-8 D2 is an 8-inch (20cm) dual voice coil car subwoofer rated at 200W RMS. Its dual 2+2 ohm coils allow wiring at 1 ohm or 4 ohm to suit your amplifier. A ferrite magnet, coated membrane cone, and fibreglass-reinforced plastic basket support consistent, long-term performance.

Who it suits

The AIR-8 D2 suits drivers who want a versatile 8-inch subwoofer that works with a range of amplifiers and enclosures. If space is tight, the AIR-F8 D2 delivers the same 200W RMS in a shallower, flat profile. For more output, the AIR-10 D2 steps up to 10 inches and 300W RMS.

Our tech experts advise

The 7.6cm mounting depth suits most sealed or ported enclosures; measure your available space before ordering. Wire the coils in parallel for 1 ohm or in series for 4 ohm, depending on your amplifier's stable impedance. Subwoofer installation is priced per vehicle at CEN — see our fitting service for details.

Explore the full Option Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Option Audio

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: How much power can the Option Audio AIR-8 D2 handle?

A: It is rated at 200W RMS.

Q: What is the mounting depth of the AIR-8 D2?

A: It needs 7.6cm of installation depth.

Q: Can the AIR-8 D2 be wired to 1 ohm or 4 ohms?

A: Yes. It has dual 2 ohm voice coils, which can be wired to give a 1 ohm or 4 ohm load to suit your amplifier.