Mosconi One 1 | 1000 Amp 1 Channel Amplifier Class D Up to 1000 Watts @ 2 Ohm
Couldn't Load Pickup availability
The Mosconi One 1|1000 is a mono Class D amplifier delivering up to 1000W RMS at 2 ohm and 600W at 4 ohm. Optimised for 2 ohm subwoofers, it combines digital efficiency with an analogue Class AB character.
Key specifications
- Channels: 1 (mono), Class D
- Power at 2 ohm: 1 x 1000W
- Power at 4 ohm: 1 x 600W
- Input sensitivity: 0.35V to 15V
- Inputs: low/high level by switch, auto sense in high level mode
- Phase shift: 0 to 360 degrees
- Remote volume control: optional RTC2
- Dimensions: 290 x 210 x 55mm
- Weight: 3.2kg
Mosconi One 1|1000
1 Channel Amplifier Class D Technology Up to 1000 Watts @ 2 Ohm
"Warm Digital Sound" - The MOSCONI ONE 1|1000 is a 1 channel high quality amplifier with Class D technology. Optimised for 2 ohm subwoofers, it delivers up to 1000 Watts to the voice coil. With analogue Class AB character, it unleashes the full potential of your music while every little detail around you takes shape.
- Remote volume control (optional RTC2)
- Phase shift (always in line): 0° ÷ 360°
- Low level / high level input mode (by switch)
- Auto sense (only in high level mode)
- Low level output
- New Design
Explore the full range in Mosconi.
Specification
| Output power @ 2Ω | 1 x 1000 Watts |
|---|---|
| Input sensitivity | 0.35 V ÷ 15 V |
| Dimensions | 290 x 210 x 55 mm |
| Crossover | Subsonic filter: (20 ÷ 100 Hz – 24 dB/Oct) Low pass filter: (40 ÷ 280 Hz – 24 dB/Oct) |
| Weight | 3.2 kg |
What's Included
- MOSCONI ONE 1 | 1000
Mosconi
About the Mosconi MOSCONI ONE 1|1000
From our tech experts at CEN
A monoblock subwoofer amplifier from Mosconi, Class D.
Who it suits
Anyone adding a subwoofer that needs real power behind it. Mosconi is Italian-built and aimed squarely at people who tune systems properly.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Mosconi range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Mosconi
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Mosconi
More options from the same range, in stock and ready to go
Save 2% Mosconi Aero 8 | 12 DSP 8 Channel In 12 Channel Out Digital Sound Processor RRP£969.99£949.99 / Save 2%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: How powerful is the Mosconi One 1|1000?
A: It delivers 1 x 1000W at 2 ohm and 1 x 600W at 4 ohm.
Q: Does the One 1|1000 work with a factory head unit?
A: Yes. It has switchable low and high level inputs, with auto sense turn-on in high level mode.
Q: Does the One 1|1000 have a remote bass control?
A: Remote volume control is available with the optional RTC2 remote.
