Shop All

Helix Compose i7 Ci7 C165.2FM-S3 Coaxial 6.5 Inch FlexMount Speakers 150w RMS

£624.99
In stock
SKU: 90719MPN: Ci7 C165.2FM-S3
Part of the range · 7 productsPart of the Helix Compose i7 range · 7 products See the range →

The Helix Ci7 C165.2FM-S3 is a 6.5 inch (165 mm) 2-way coaxial speaker pair from the Helix Compose i7 series, rated at 150W RMS (225W max). Made in Germany, it pairs a 20 mm silk dome tweeter concentrically with a 3 ohm UHD paper cone midbass for a true point-source installation.

There is no integrated crossover. Run it actively with two amplified DSP channels per speaker (with a highpass filter set for the tweeter), or add the separately available Ci7 FX-UNI.2 Flex-Crossover for passive 2-way operation. Vehicle-specific FlexMount165 adaptors and WireKits are available separately.

Key specifications

  • Size: 6.5 inch / 165 mm 2-way coaxial
  • Power handling: 150W RMS, 225W max
  • Impedance: 3 ohm midbass, 4 ohm tweeter
  • Frequency response: 50 Hz – 30,000 Hz
  • Sensitivity: 92 dB @ 2.83V / 1m, 88 dB @ 1W / 1m
  • Tweeter: 0.75 inch / 20 mm silk dome with coupling volume
  • Installation depth: 65.8 mm
  • Installation diameter: 142 mm
  • Crossover: none integrated (active DSP or Ci7 FX-UNI.2)
  • Origin: made in Germany

Developed Inside the Vehicle

Compose is Helix's approach to modern car audio. Developed inside the vehicle, for the vehicle, it combines universal fitment with the performance benefits of vehicle-specific systems.

3 Ohm Efficiency

The 3 ohm design raises efficiency and maximum sound pressure. Impedances are matched to Helix and MATCH amplifiers, ensuring full performance from the pairing.

Made in Germany

Drawing on expertise from Helix's high-end sister brand BRAX, the i7 series is built entirely in Germany. The midbass uses an Ultra High Damping (UHD) crafted paper cone, and every unit is tuned for precise music reproduction.

Specification
Made in GermanyNoteThe speaker does not have an integrated crossover. For active operation, two amplified DSP channels per speaker are required and it is essential to set a highpass filter for the tweeter in the pre-connected DSP or DSP amplifier. Alternatively, the separately available crossover Ci7 FX-UNI.2 can be used.
Power handlingRMS / Max. P 150 / 225 Watts
Frequency response50 Hz - 30,000 Hz
ImpedanceZ 3 Ω
SensitivitySPL 92 dB @ 2.83V / 1m 88 dB @ 1W / 1m
ImpedanceZ 3 Ω
Conearea Sd 131 cm2
Voice coildiameter ø 37 mm
Voice coilwinding height 13.4 mm
ImpedanceZ 4 Ω
Voice coildiameter ø 20 mm
Crossover 2-way activetwo amplified DSP channels per speaker required
2-way passivei7 FX-UNI.2 optionally available
More specs
  • 2-way high-end coaxial coincident speaker which combines outstanding sound performance with versatile physical integration options
  • Concentric speaker as a true point source for superior sound dispersion & unparalleled audio precision
  • Tweeter Super-wide dispersion 0.75” / 20 mm high-end silk dome tweeter with coupling volume for lowest possible resonance frequency
  • Exceptionally lightweight and fine-meshed silk dome ensures brilliant and smooth treble response
  • Integrated, dampened coupling volume allows a low crossover frequency thanks to its low resonance frequency
  • 4 Ohms impedance
  • Midbass 6.5" / 165 mm midbass with Ultra High Damping (UHD) crafted paper cone for outstanding impulse response and unmatched frequency response
  • High-tech polymer composite basket reinforced with glass beads for enormous rigidity and minimized ringing
  • Large 1.46” / 37 mm voice coil ensures minimum thermal compression and high power handling
  • High efficiency and 3 Ohms technology for maximized power output of the amplifier
  • Automotive grade ProConnect connection terminal allows the use of conventional speaker cables or a fast, secure and fail-safe connection via optionally available WireKits
  • Designed for the optionally available car-specific FlexMount165 adaptors which allow an acoustically optimized and professional integration in the original mounting location of the vehicle
  • Designed for optionally available, car-specific WireKits which allow a non-destructive integration
  • Outer diameter ø 165.0 mm / 6.50”
  • Installation diameter ø 142.0 mm / 5.59”
  • Installation depth 65.8 mm / 2.59”
  • DC resistance Re 3.0 Ω
  • Resonance frequency Fs 59 Hz
  • Mechanical Q factor Qms 3.99
  • Electrical Q factor Qes 0.64
  • Total Q factor Qts 0.55
  • Compliance Cms 572 μm/N
  • Equivalent air volume Vas 13.3 L
  • Force factor B*l 4.7 Tm
  • Moving mass Mms 13.0 g
  • Mechanical resistance Rms 1.21 kg/s
  • Max. linear excursion Xmax +/- 3.7 mm
  • Tweeter Silk dome with coupling volume
  • Midbass Ultra high damping (UHD) crafted paper cone, ProConnect terminal and FlexMount165
  • FlexMount165
  • WireKits
What's Included
  • 2 x Ci7 C165.2FM-S3
  • 2 x Tweeter connection cable
  • 2 x Midbass connection cable
  • 2 x Connection cable
  • 1 x Mounting material
  • 1 x Instruction manual
Product information

Helix

About the Helix CI22620

From our tech experts at CEN

Helix Compose i7 6.5 inch coaxial speakers, with the tweeter mounted in the centre of the woofer, rated at 150w RMS.

Who it suits

Drivers replacing tired factory speakers who want a clear improvement without relocating tweeters.

Our tech experts advise

Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering rather than guessing. Door treatment and tweeter placement change the result as much as the speaker does. Installation and tuning are priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Helix range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Helix

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: Do I need an amplifier to run these speakers?

A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Does the Ci7 C165.2FM-S3 have a built-in crossover?

A: No. It has no integrated crossover. For active operation it needs two amplified DSP channels per speaker with a highpass filter set for the tweeter. Alternatively, the separately available HELIX Ci7 FX-UNI.2 crossover can be used for passive operation.

Q: What impedance is the Ci7 C165.2FM-S3?

A: The midbass is 3 ohms and the tweeter is 4 ohms. HELIX uses 3 ohm technology to get more power out of the amplifier.

Q: What is the installation depth of the Ci7 C165.2FM-S3?

A: The installation depth is 65.8 mm and the installation diameter is 142 mm, with an outer diameter of 165 mm.