Couldn't Load Pickup availability
The AudioControl EPICPRO4T is a pair of 4-inch EPIC Pro bullet tweeters rated at 80W RMS (120W max) with 108 dB sensitivity, designed for high-efficiency SPL car audio systems.
Key specifications
- Size: 4 in / 102 mm bullet tweeter
- Power handling: 80W RMS / 120W max
- Impedance: 4 ohms
- Frequency response: 2,000 Hz – 20,000 Hz
- Sensitivity: 108 dB @ 2.83V / 1m
- Voice coil: 1.5 in / 38 mm
- Cut-out diameter: 71 mm
- Mounting depth: 42 mm
- Supplied as: pair
About the EPIC Pro range
The EPIC Pro speaker line is built for systems that need serious output — whether that's a show build or a clean daily driver setup.
EPIC Pro speakers are engineered to project sound far and wide with refined accuracy, delivering high performance and strong efficiency across live and studio material.
Rather than choosing between a dust cap or a phase plug, AudioControl combined both into its phase cap design. This widens bandwidth, increases efficiency and smooths the transition between mid and high frequencies.
Precision-tuned components, lightweight materials and ground-up California engineering mean these tweeters get loud without wasting power from your amplifier. There is an EPIC Pro speaker for every kind of build.
Features
- High efficiency and low distortion: concert-level sound even at extreme volumes.
- Huge output and far projection: massive sound that fills your vehicle and projects powerfully.
- High SPL capability: built to handle serious power with volume and dynamic impact.
- Phase cap design: boosts efficiency and widens bandwidth, delivering more sound from less power.
- Lightweight components and precision tolerances: engineered for efficiency, impact and accurate audio reproduction.
- AudioControl engineered: designed from the ground up by AudioControl's California engineering team.
- Voiced to pair with EPIC Series amplifiers: specifically tuned to integrate with AudioControl's EPIC amplifier range.
Explore the full range in AudioControl Accessories.
Specification
| Speaker Size | 4.0 in / 102 mm |
|---|---|
| Impedance | 4 ohms |
| Voice Coil | 1.5 in / 38 mm |
| Frequency Response | 2000 Hz – 20000 Hz |
| Sensitivity | 108 dB @ 2.83V / 1M |
| Magnet | Weight 227 g |
| Power | 80 W RMS / 120 W Max |
| Overall Diameter | 3.86 in / 98 mm |
| Cut Out Diameter | 2.79 in / 71 mm |
| Mounting Depth | 1.65 in / 42 mm |
| Total Depth | 1.88 in / 47.8 mm |
What's Included
- 2 x EPICPRO4T Tweeters
- Manual
AudioControl
About the AudioControl EPICPRO4T
From our tech experts at CEN
The AudioControl EPICPRO4T is a pair of 4 inch bullet tweeters from the EPIC Pro range, rated at 80 W RMS and 120 W maximum into 4 ohms. With 108 dB sensitivity and a 2 kHz to 20 kHz response, they are built for loud, efficient systems, with a phase cap design to smooth the transition from the midrange.
Who it suits
SPL and show builds where the tweeters need to project over powerful midranges and subwoofers. If you want more power handling and a lower 1.5 kHz reach, the EPICPRO3NT handles 140 W RMS at 105 dB. Both pair with EPIC Pro midranges such as the EPICPRO8X.
Our tech experts advise
They need a 71 mm cut-out and 42 mm of mounting depth. Use a high-pass filter from the amplifier or processor at 2 kHz or above, and set gains carefully, as efficiency this high exposes hiss and harshness quickly. Installation is priced per vehicle, so get in touch.
Explore the full AudioControl range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all AudioControl
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from AudioControl Accessories
More options from the same range, in stock and ready to go
Frequently Asked Questions
Q: How much power can the EPICPRO4T tweeters handle?
A: Each EPICPRO4T is rated at 80W RMS and 120W max into 4 ohms.
Q: What size hole do the EPICPRO4T tweeters need?
A: The cut-out diameter is 71 mm (2.79 in), with a mounting depth of 42 mm and a total depth of 47.8 mm. The overall diameter is 98 mm.
Q: What frequency range do the EPICPRO4T tweeters cover?
A: They are rated from 2,000 Hz to 20,000 Hz, with a sensitivity of 108 dB at 2.83V / 1m.
Q: What is in the box with the EPICPRO4T?
A: Two EPICPRO4T tweeters and a manual.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
