Vibe Powerbox 250.2-V0 Amp Class AB 2 Channel Bridgeable Car Stereo Amplifier
Couldn't Load Pickup availability
The Vibe Powerbox 250.2-V0 is a high power Class AB 2 channel car amplifier delivering 2 x 250W RMS at 4 ohms, 2 x 350W at 2 ohms or 1 x 700W bridged at 4 ohms. It has onboard active crossovers, variable bass boost and a high level input with auto turn-on.
Key specifications
- Channels: 2, bridgeable
- RMS at 4 ohm: 2 x 250W
- RMS at 2 ohm: 2 x 350W
- Bridged at 4 ohm: 1 x 700W
- Maximum power: 1400W
- Frequency response: 20Hz to 20kHz
- Topology: Class AB
- Inputs: High level with auto turn-on
POWERBOX250.2-V0 2 channel bridgeable Class AB amplifier
The new Vibe Powerbox amplifier range is designed to offer a Vibe amplifier to power any speaker, subwoofer or enclosure in the Vibe range. Mono, 2, 4 and 5 channel amplifiers give a solution for any system. All the amplifiers feature auto sense technology which allows the amp to turn on and off without the need for a +12v remote trigger when using high level input. Signature Vibe detailing and an attractive satin silver finish with gloss black endplates give the Powerbox range a distinctive look.
- 2 Channel Stereo Amplifier
- Unique heatsink design with illumination
- Bridgeable Channels at 4 Ohm
- High Power class AB design
Explore the full range in 2 Channel Amplifiers.
Specification
| RMS @ 4Ω Stereo | 2 x 250W |
|---|---|
| RMS @ 2Ω Stereo | 2 x 350W |
| RMS @ 4Ω Mono | 1 x 700W |
| Maximum Power | 1400W |
| Frequency Response | 20Hz – 20kHz |
More specs
| |
What's Included
- Vibe POWERBOX250.2-V0 2 Channel Bridgeable Class AB amplifier
Vibe
About the Vibe POWERBOX250.2-V0
From our tech experts at CEN
A 2-channel amplifier from Vibe’s Powerbox range, Class AB, in a compact chassis small enough to hide under a seat.
Who it suits
Drivers whose speakers have outgrown the head unit. Micro amplifiers suit vans, campers and modern cars where there is nowhere to put a full-size chassis. Powerbox is Vibe’s long-running amplifier line, known for compact chassis.
Our tech experts advise
Matching matters more than headline watts, and gains want setting with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from 2 Channel Amplifiers
More options from the same range, in stock and ready to go
Save 10% Helix Next V Two Bridgeable 2 Channel Amp with V-AMP Link Amplifier 800w RMS RRP£499.00£449.99 / Save 10%In stock
Alpine SWA-150KIT Amp 2 Channel Amplifier with Bass Remote Designed for SWC-D84S £129.99 /Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: Is the Vibe Powerbox 250.2-V0 Class AB or Class D?
A: It is a Class AB amplifier, with an anodised extruded aluminium heatsink.
Q: Can the Powerbox 250.2-V0 be bridged to run a subwoofer?
A: Yes. Its channels bridge at 4 ohms to give 1 x 700W RMS, and it has onboard active crossovers and a variable bass boost circuit.
