RetroSound Dual Voice Coil 5.25 Inch Single Stereo Dash Speaker 25w RMS
Couldn't Load Pickup availability
The RetroSound D-52 is a single 5.25 inch dual voice coil stereo dash speaker, rated at 25W RMS, from the RetroSound speaker range. It produces a stereo mix from one speaker location, making it ideal for classic cars and trucks with a single centre dash opening.
The RetroSound speaker range is also available as a 4x8 inch single stereo speaker (60W RMS) and a 4x10 inch single speaker (90W RMS).
Key specifications
- Model: RetroSound D-52
- Size: 5.25 inch, sold as a single speaker
- Type: dual voice coil stereo dash speaker
- Impedance: 4+4 ohm
- Power handling: 25W RMS / 50W peak
- Frequency response: 60Hz–21kHz
- Sensitivity: 87dB (1W/1m)
- Mounting depth: 57mm (2.24 inch)
- Grille: not included
RetroSound D-52 5.25" Stereo Dash Speaker
RetroSound Stereo Dash Speakers deliver a stereo mix from a single speaker location. The dual voice coil design is built to perform in an open-air environment, suited to classic cars and trucks. A ceramic magnet structure handles high power without distortion, aided by a dip-cut design. Flush-mounted Mylar tweeters produce clear highs, and treated foam surrounds offer durable, accurate audio reproduction.
- 5.25 inch dash speaker, sold as a single unit
- Dual voice coils produce a stereo mix from one speaker
- Ceramic magnet structure for high power handling
- TrueRating power handling: 25W RMS / 50W peak
- Shallow mounting depth: 57mm (2.24 inch)
Explore the full range in RetroSound Speakers.
Specification
| Frequency Response | 60Hz-21kHz |
|---|---|
| Sensitivity | (SPL@1w/1m) 87dB |
| Power Handling | (watts RMS/peak) 25/50 |
| Mounting Depth | (inch) 2.24 |
| Mounting Depth | (mm) 57 |
More specs
| |
What's Included
- 1x Speaker
- 1x Wire
- 4x Screws
RetroSound
About the RetroSound D-52
From our tech experts at CEN
A single dash speaker with dual voice coils, so one speaker in a single factory aperture still carries both stereo channels, 5.25 inch, rated at 25w RMS, designed for classic cars rather than modern door cards.
Who it suits
Owners of classics with a single central dash speaker, where cutting extra holes is not an option and originality matters.
Our tech experts advise
In older cars the limiting factors are aperture size, mounting depth and the state of the wiring rather than the speaker itself. We check all three before ordering. get in touch. See car audio installation.
Explore the full RetroSound range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all RetroSound
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from RetroSound Speakers
More options from the same range, in stock and ready to go
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Is the RetroSound D-52 a single speaker or a pair?
A: It is a single speaker. Its dual voice coils produce a stereo mix from one speaker location, which suits a single dash speaker opening.
Q: What is the mounting depth of the RetroSound D-52?
A: The mounting depth is 2.24 inches (57mm).
Q: What is in the box with the RetroSound D-52?
A: One speaker, one wire and four screws. A grille is not included.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →