RetroSound Premium Stereo Speakers 6x9 Inch with Grills Sold as a Pair 100w RMS
Couldn't Load Pickup availability
The RetroSound R-693N is a pair of 6x9 inch premium Triax 3-way car speakers rated at 100W RMS / 200W max, with silk tweeters and a 48.5mm mounting depth. They are part of the RetroSound Premium Stereo Speaker range, designed for classic cars and trucks requiring full-range sound from a slim enclosure. Grilles are included.
This listing is the 6x9 inch pair. The RetroSound Premium Stereo Speaker range is also available as a 4x6 inch pair at 25W RMS.
Key specifications
- Model: R-693N
- Size: 6x9 inch, 3-way Triax (sold as a pair)
- Power handling: 100W RMS / 200W max
- Impedance: 4 ohm
- Frequency response: 40Hz – 21kHz
- Sensitivity: 90dB (1W/1m)
- Mounting depth: 48.5mm (1.9 inch)
- Grilles: included
RetroSound R-693N
RetroSound Premium Triax Stereo Speakers are 3-way speakers built with three separate drivers — dedicated to highs, mids and lows — for a broader frequency response and greater clarity across each range. A Neodymium magnet structure with a dip-cut design provides high power handling while keeping the mounting depth ultra-thin. Santoprene® surrounds deliver accurate audio reproduction, and the silk tweeters produce smooth, natural highs.
- Grilles included
- 6x9 inch stereo speakers, sold as a pair
- Triax® 3-way frequency response
- Neodymium magnet structure for ultra-thin design
- Santoprene® surrounds for accurate audio reproduction
- Silk tweeters for smooth, natural highs
- TrueRating power handling: 100W RMS / 200W max
- Mounting depth: 1.9 inches (48.5mm)
Explore the full range in RetroSound Speakers.
Specification
| Frequency Response | 40Hz-21kHz |
|---|---|
| Sensitivity | (SPL@1w/1m) 90dB |
| Power Handling | (watts RMS/peak) 100/200 |
| Mounting Depth | (inch) 1.9 |
| Mounting Depth | (mm) 48.5 |
More specs
| |
What's Included
- 2x Speakers
- 2x Grills
- 2x Wire
- 8x Screws
- 8x Speed Clips
RetroSound
About the RetroSound R-693N
From our tech experts at CEN
Speakers, 6x9 inch, rated at 100w RMS, designed for classic cars rather than modern door cards.
Who it suits
Classic car owners replacing tired or failed speakers with something that fits the original openings.
Our tech experts advise
In older cars the limiting factors are aperture size, mounting depth and the state of the wiring rather than the speaker itself. We check all three before ordering. get in touch. See car audio installation.
Explore the full RetroSound range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all RetroSound
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from RetroSound Speakers
More options from the same range, in stock and ready to go
RetroSound Surface Mount 2 Way Speakers 4 Inch Sold as a Pair
£79.99
View product
RetroSound Premium 5x7 Inch 2 Way Dual Voice Coil Dash Speaker RS-UB1KT 60w RMS
£69.99
RetroSound Dual Voice Coil 5.25 Inch Single Stereo Dash Speaker 25w RMS
£49.99
RetroSound RetroPod Surface Mount Kick Panel Speaker Pods for 6.5 Inch Speakers
£59.99
RetroSound 4 Inch Speaker Grills Sold as a Pair Low Key Plain Black Mesh Grill
£14.99
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: Is the RetroSound R-693N a 3-way speaker?
A: Yes. The R-693N is a Triax 3-way design with separate drivers for highs, mids and lows.
Q: How deep are the R-693N 6x9 speakers?
A: The mounting depth is 48.5mm (1.9 inch).
Q: What power do the R-693N speakers handle?
A: They are rated at 100 watts RMS and 200 watts max, at 4 ohms with 90dB sensitivity.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →