







Morel Elate Carbon MT450 1.1 Inch Tweeters 130w RMS Pair
Couldn't Load Pickup availability
The Morel Elate Carbon MT450 is a pair of 28mm (1.1 inch) Acuflex coated soft dome tweeters from Morel's Elate Carbon range, with a dual neodymium (DMM) motor and 130W RMS power handling.
The MT450 is the tweeter supplied with the standard Elate Carbon component systems, such as the Elate Carbon 63. For the higher-power tweeter used in the Pro systems, see the Elate Carbon Alto.
Key specifications
- Type: 28mm (1.1") soft dome tweeter, supplied as a pair
- Dome: Acuflex hand-coated silk, open cavity design
- Motor: DMM dual neodymium, rear vented
- Impedance: 6 ohms
- Power handling: 130W RMS, 350W max transient (10ms)
- Sensitivity: 91 dB (2.83V/1m)
- Frequency response: 1400 - 25,000 Hz
- Mounting: 46mm cutout, 13mm depth, 43mm unit diameter
Morel Elate Carbon MT450 Tweeter
The Elate Carbon MT450 delivers high-frequency performance in a compact form, with high power handling and very low distortion. Its size fits most factory locations, and both chrome-ringed surface and flush mount options are included for a clean finish in modern vehicles.
DMM Motor
Morel's double drive system generates more magnetic energy than a single magnet of similar size, increasing efficiency and dynamic range. The secondary magnet is fixed above the top plate, which controls stray magnetic flux, focuses the magnetic field, and contributes to the shielded characteristic of the speaker.
Handcrafted Acuflex Soft Dome
A specially engineered damping compound is hand-applied to the soft dome, adding rigidity and damping to improve clarity and bandwidth. The Acuflex diaphragm uses controlled cancelling break-up (accurate–flexing), where each break-up mode is counteracted by another in the opposite direction, resulting in a smooth frequency response.
Hexatech Aluminium Voice Coil
The Hexatech voice coil is wound from 100% aluminium wire shaped in a honeycomb configuration, reducing air gaps in the coil windings and increasing efficiency by up to 20%. Its low mass contributes to the fast transient response Morel drive units are known for.
Explore the full range in Morel Elate Carbon.
Specification
| Nominal Impendance (ohm) | 6 |
|---|---|
| Power Handling | Wrms 130 |
| Max. Trans. Pwr Handling Wrms (10ms) | 350 |
| Sensitivity | (2.83 V/1M) dB 91 |
| Frequency Response | Hz 1400-25000 |
| FS Hz | 1000 |
| Voice Coil | Diameter mm (inch) 28 (1.125) |
| Voice Coil | Former Aluminium |
| Voice Coil | Wire HexatechTM aluminium |
| DC Resistance ohm | 5.2 |
| Magnet | System Neodymium Rear Vented |
| Dome Type | AcuflexTM hand coated soft dome |
| Dome Material | Silk |
| Unit Diameter mm (inch) | 43.00 (1.69) |
| Mounting Dept mm (inch) | 13.00 (0.5) |
| Mounting Cutout mm (inch) | 46.00 (1.81) |
| Net Weight Kg (lb) | 0.07 (0.15) |
What's Included
- 2 x Morel Elate Carbon MT450
Morel
About the Morel Elate Carbon MT450
From our tech experts at CEN
Morel Elate Carbon tweeters, 1.1 inch, handling 130w RMS.
Who it suits
Drivers building or repairing a front stage where the tweeter needs mounting higher than the door, and anyone whose system sounds dull at the top.
Our tech experts advise
Placement and aiming change the sound more than the tweeter does, and they must be crossed over properly so they are never asked to play too low. get in touch if you are unsure how they would integrate with your speakers. See car audio installation.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: What size cutout does the MT450 tweeter need?
A: A 46mm mounting cutout with 13mm mounting depth. The unit diameter is 43mm.
Q: Can the MT450 be flush mounted?
A: Yes. It has a chrome-ringed surface and flush mount options, and its compact size lets it fit most factory locations.
Q: How much power can the MT450 handle?
A: 130W RMS with 350W maximum transient power handling (10ms), at a nominal 6 ohms and 91 dB sensitivity.
Q: Are the MT450 tweeters sold as a pair?
A: Yes. The box contains 2 x Morel Elate Carbon MT450 tweeters.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →





































