Shop All

Morel Elate Carbon Pro 62A 6.5 Inch 2 Way Active Component Speakers 180w RMS

£2,449.00
In stock
SKU: 91173MPN: Elate Carbon Pro 62A
Part of the range · 28 productsPart of the Morel Elate Carbon range · 28 products See the range →

The Morel Elate Carbon Pro 62A is a 6.5 inch 2-way active component speaker system from Morel's high-end Elate Carbon Pro range, handling 180W RMS. Supplied without passive crossovers, it is for amplifier and DSP-based systems where each driver gets its own channel for full tuning control.

Key specifications

  • Size: 6.5 inch, 2-way active component system
  • Power handling: 180W RMS, 1000W peak
  • Impedance: 4 ohms
  • Sensitivity (2.83V): 87dB
  • Frequency response: 30Hz - 25kHz
  • Tweeter: 1.1 inch Alto silk dome
  • Woofer: carbon fibre composite cone, rubber surround

Morel Elate Carbon Pro 62A

The Morel Elate Carbon Pro 62A sits in the Elate Carbon Pro range, Morel's high-end line. The 6.5 inch drivers handle 180W RMS and are designed for active, DSP-driven installations.

Carbon and Rohacell cones

The woofers use carbon fibre and Rohacell composite cones. Detail stays clean at high volumes, and power handling is strong across the full frequency range.

The Elate Alto tweeter

The cavity-back Alto silk dome tweeter heads up the Pro series. Its design is derived from Morel's flagship Supremo Piccolo, combining high resolution with high power handling.

DMM and EVC motor technology

Morel's DMM double-magnet motor generates more energy than a single-magnet design, raising both efficiency and dynamic range while shielding stray magnetic flux. The oversized EVC voice coils ensure all available magnetic energy drives the coil directly, keeping the design compact, efficient and powerful.

Built for active systems

This is the active version of the Elate Carbon Pro system. Each driver connects directly to a dedicated amplifier or DSP channel, giving you complete control over crossover points and system tuning.

Specification
Impedance(Ohms)    4
Sensitivity(1W at 1 meter)    N/A
Sensitivityat 2.83 volts    87
Frequency Response   30 - 25k Hz
More specs
  • Speaker Size    6 1/2
  • Design    2-way
  • Tweeter Design    1.1" Dome
  • Tweeter Composition    Silk
  • Woofer Composition    Carbon Fiber Composite
  • Woofer Surround    Rubber
  • Maximum RMS Wattage    180
  • Peak Power Handling (Watts)    1000
  • Top-mount Depth (Inches)    2 7/16
  • Bottom-mount Depth (Inches)    2 11/16
  • Cutout Diameter or Length (inches)    5 1/2
  • Mounting Height (Inches)    0.453
What's Included
  • 2 MW6 Woofers
  • 2 Alto Tweeters (with attached 7" length of speaker wire)
  • 2 Woofer grilles (installed)
  • 2 Tweeter grilles (installed)
  • Eight 1-1/4" Screws
  • Six 3/4" Screws
  • 8 Large speed clips
  • 6 Small speed clips
  • Grille putty
  • Four 0.25" Crimp-on female quick slides
  • Four 0.110" Crimp-on female quick slides
  • Installation guide
  • Warranty card
  • Genuine product verification instructions
Product information

Morel

About the Morel Elate Carbon Pro 62A

From our tech experts at CEN

Morel Elate Carbon Pro 6.5 inch component speakers, with separate tweeters that can be mounted where you will actually hear them, rated at 180w RMS.

Who it suits

Drivers building a front stage who care about staging and detail rather than volume. Morel is a brand people move to when they have outgrown their first upgrade.

Our tech experts advise

Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering rather than guessing. Door treatment and tweeter placement change the result as much as the driver does, and speakers at this level deserve an amplifier. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Will these speakers fit my car?

A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.

Q: What is the difference between coaxial and component speakers?

A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.

Q: Do these come as a pair?

A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.

Q: Can CEN fit these speakers for me?

A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.

Q: Do I need an amplifier or DSP for the Morel Elate Carbon Pro 62A?

A: Yes. The 62A is the active version of the system, so each driver connects straight to its own amplifier or DSP channel and the crossover is set in your processor.

Q: What is the power handling of the Elate Carbon Pro 62A?

A: It handles 180W RMS, with a peak power handling of 1000W and a 4 ohm impedance.

Q: What is included with the Elate Carbon Pro 62A?

A: Two MW6 woofers, two Alto tweeters with attached speaker wire, woofer and tweeter grilles (installed), screws, speed clips, grille putty, crimp-on quick slides, an installation guide, a warranty card and genuine product verification instructions.