Kicker 50DCWC102 Dual 10 Inch CompC Ported Loaded Subwoofer Enclosure 500w 2ohm
Couldn't Load Pickup availability
The Kicker 50DCWC102 is a ported loaded subwoofer enclosure fitted with dual 10" CompC drivers, wired to a single 2 ohm terminal and rated at 500W RMS. It is part of Kicker's CompC range.
This listing is the dual 10" version. The CompC loaded enclosure range is also available in a dual 12" 600W RMS version.
Key specifications
- Subwoofers: 2 x 10" (25 cm) CompC, included
- Impedance: single 2 ohm terminal
- Recommended power: 500W RMS, 1000W peak
- Sensitivity: 98.4 dB 1W/1m
- Tuning frequency: 35 Hz
- Dimensions: 71.1 cm W x 35.6 cm H x 34.3 cm top depth / 41.4 cm bottom depth
- Construction: heavy MDF, black carpet
Dual 10" CompC Enclosure 2 Ohm (50DCWC102)
A factory-tuned ported enclosure loaded with dual 10" CompC subwoofers, ready to drop straight into your boot or SUV.
- Designed to fit a boot or SUV load area
- Genuine CompC subwoofers included
- Custom port design, factory-tuned at 35 Hz
- Heavy MDF cabinet construction
- Spring-loaded speaker terminal for quick, secure amp connection
- Thick black carpet finish protects the enclosure
- Embroidered Kicker logo
Dual 10" CompC 2 Ohm Enclosure
The 50DCWC102 comes loaded with dual 10" CompC subwoofers in a single ported cabinet. Rated at 500W RMS and wired to a single 2 ohm terminal, it connects straight to a compatible amplifier with no extra wiring complexity. The port is factory-tuned for strong low-end output. Heavy MDF construction keeps the cabinet rigid and resonance controlled. Spring-loaded speaker terminals make amp connection quick and secure. A thick black carpet finish protects the enclosure and keeps the install looking tidy.
Explore the full range in Kicker Loaded Subwoofer Enclosures.
Specification
| Impedance | (Ohms) 2 |
|---|---|
| Sensitivity | (dB 1w/1m) 98.4 |
More specs
| |
What's Included
- Kicker Dual 10" CompC Enclosure
Kicker
About the Kicker 50DCWC102
From our tech experts at CEN
A 10 inch subwoofer supplied in its enclosure, so box volume and tuning are already matched to the driver rather than left for you to work out.
Who it suits
Drivers who want bass without commissioning a custom build. A loaded enclosure is the quickest route to a result that works, because most disappointing subwoofer installs come down to the wrong box rather than the wrong driver.
Our tech experts advise
It still needs an amplifier matched to it and a fused power feed from the battery. How the box is secured matters too: an unrestrained enclosure is dangerous in an accident. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Kicker Loaded Subwoofer Enclosures
More options from the same range, in stock and ready to go
Best Seller Kicker 51PTRTP12 Powered Down Firing 12" Sub Active Subwoofer Enclosure 500w RMS £499.95 /In stock
Kicker 51PTRTP10 Powered Down Firing 10" Sub Active Subwoofer Enclosure 400w RMS £449.95 /Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Are the subwoofers included with the Kicker 50DCWC102?
A: Yes. It is a loaded enclosure supplied with two 10 inch CompC subwoofers already fitted.
Q: What amplifier does the 50DCWC102 need?
A: Use a mono amplifier that is stable at 2 ohms. Kicker recommends 500W RMS.
Q: How big is the 50DCWC102 enclosure?
A: It measures 71.1 cm wide, 35.6 cm high, 34.3 cm deep at the top and 41.4 cm deep at the bottom.
