Kicker 46TL7T82 Sub 8 Inch L7T Subwoofer Thin Profile Loaded Enclosure 350w RMS
Couldn't Load Pickup availability
The Kicker 46TL7T82 is a thin-profile loaded enclosure from the Solo-Baric L7T range, fitted with an 8" square subwoofer and rated at 350W RMS into a 2 ohm load. At around six inches deep, it is designed to fit under or behind the seats of trucks, saloons and hatchbacks.
This listing is the 8" version. The L7T thin-profile loaded enclosure is also available in 10" and 12".
Key specifications
- Subwoofer: Solo-Baric L7T 8" square, included
- Impedance: 2 ohm
- Power handling: 350W RMS
- Sensitivity: 84.835 dB 1W/1m
- Depth: 3-5/8" (9.2 cm) top, 6-1/4" (16 cm) bottom
- Height x width: 28.5 x 50 cm
- Construction: thick MDF, black carpet
TL7T 8" Thin Profile Loaded Enclosure - 2 Ohm
46TL7T82
At just six inches deep, this ready-to-install enclosure fits under or behind your seats and delivers serious bass straight out of the box.
The TL7T comes loaded with Kicker's square L7T subwoofer, built from thick MDF and finished in black carpet trim. It handles up to 350W RMS — a solid choice where space is tight but output still matters. Prefer to build your own box? The bare 46L7T82 L7T subwoofer is also available separately.
- 8" L7T square subwoofer included
- 350W RMS recommended power
- 2 ohm impedance
- Thin profile, barely six inches deep
- Thick MDF construction
- Black carpet finish
- Fits under or behind seats
Explore the full range in Kicker Loaded Subwoofer Enclosures.
Specification
| Impedance | - 2 Ohm |
|---|---|
| Sensitivity | - 84.835 dB 1w/1m |
More specs
| |
What's Included
- Kicker 8" Thin Profile Enclosure with L7T 8" subwoofer fitted
- 4 x mounting brackets
- 4 x #10 wood screws (20 mm)
- 8 x #8 wood screws (20 mm)
- Owner's manual
Kicker
About the Kicker 46TL7T82
From our tech experts at CEN
An 8 inch subwoofer supplied in its enclosure, handling 350w RMS, so box volume and tuning are already matched to the driver rather than left for you to work out.
Who it suits
Drivers who want bass without commissioning a custom build. A loaded enclosure is the quickest route to a result that works, because most disappointing subwoofer installs come down to the wrong box rather than the wrong driver.
Our tech experts advise
It still needs an amplifier matched to it and a fused power feed from the battery. How the box is secured matters too: an unrestrained enclosure is dangerous in an accident. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Kicker Loaded Subwoofer Enclosures
More options from the same range, in stock and ready to go
Best Seller Kicker 51PTRTP12 Powered Down Firing 12" Sub Active Subwoofer Enclosure 500w RMS £499.95 /In stock
Kicker 51PTRTP10 Powered Down Firing 10" Sub Active Subwoofer Enclosure 400w RMS £449.95 /Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Is the subwoofer included with the Kicker 46TL7T82?
A: Yes. It is a loaded enclosure supplied with a genuine Kicker L7T 8 inch subwoofer already fitted.
Q: Will the 46TL7T82 fit under a seat?
A: It is designed for under-seat or behind-seat mounting, with a top depth of 3-5/8" (9.2 cm) and a bottom depth of 6-1/4" (16 cm). Check the space in your vehicle against these figures, or ask CEN to confirm fitment.
Q: What amplifier does the 46TL7T82 need?
A: Use a mono amplifier that is stable at 2 ohms. Kicker recommends 350W RMS for this enclosure.
