Kicker 48TCWRT102 Sub 10 Inch Thin Profile Subwoofer Loaded Enclosure 400w RMS
Couldn't Load Pickup availability
The Kicker 48TCWRT102 is a 10 inch CompRT thin-profile loaded enclosure, rated at 400W RMS into a single 2 ohm terminal. It pairs a CompRT active subwoofer with a reFLEX passive radiator and belongs to Kicker's CompRT loaded enclosure range.
This listing is the 10 inch. The CompRT thin-profile loaded enclosure is also available in 6.75 inch, 8 inch and 12 inch.
Key specifications
- Subwoofer: 10 inch (25 cm) CompRT active sub plus reFLEX passive radiator
- Impedance: single 2 ohm terminal
- Recommended power: 400W RMS
- Peak power: 800W
- Sensitivity: 96.5 dB 1W/1m
- Dimensions: 59.1 cm W x 39 cm H x 8.8 cm top depth / 16.7 cm bottom depth
- Construction: thick MDF, internal bracing, carpet finish
CompRT 10 inch thin-profile loaded enclosure — 2 ohm
The CompRT loaded enclosure delivers large bass output in a compact footprint. It fits under a seat, behind a rear bench or in a cargo area, and arrives pre-loaded and carpeted with a single 2 ohm terminal ready to connect.
The enclosure is built from thick MDF with extensive internal bracing. The CompRT sub features red double stitching bonding the Santoprene surround to the polypropylene cone. SoloKon™ technology joins the cone to a vented back brace, forming a single integrated unit that cools the motor and reduces distortion. Forced-Air Cooling™ helps the driver run 20 per cent cooler for improved long-term reliability.
The CompRT 10 inch enclosure works best with 400W of recommended power.
Explore the full range in Kicker Loaded Subwoofer Enclosures.
Specification
| Impedance | - 2 Ohm |
|---|---|
| Sensitivity | - 96.5 dB 1w/1m |
More specs
| |
What's Included
- Kicker CompRT 10 Inch 2 ohm
Kicker
About the Kicker 48TCWRT102
From our tech experts at CEN
A 10 inch subwoofer supplied in its enclosure, handling 400w RMS, so box volume and tuning are already matched to the driver rather than left for you to work out.
Who it suits
Drivers who want bass without commissioning a custom build. A loaded enclosure is the quickest route to a result that works, because most disappointing subwoofer installs come down to the wrong box rather than the wrong driver.
Our tech experts advise
It still needs an amplifier matched to it and a fused power feed from the battery. How the box is secured matters too: an unrestrained enclosure is dangerous in an accident. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Kicker Loaded Subwoofer Enclosures
More options from the same range, in stock and ready to go
Best Seller Kicker 51PTRTP12 Powered Down Firing 12" Sub Active Subwoofer Enclosure 500w RMS £499.95 /In stock
Kicker 51PTRTP10 Powered Down Firing 10" Sub Active Subwoofer Enclosure 400w RMS £449.95 /Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Is the subwoofer included with the Kicker 48TCWRT102?
A: Yes. It is a loaded enclosure supplied with a 10 inch CompRT active subwoofer and a reFLEX passive radiator already fitted and wired to a single 2 ohm terminal.
Q: What amplifier does the 48TCWRT102 need?
A: Use a mono amplifier that is stable at 2 ohms. Kicker recommends 400W RMS for this enclosure.
Q: How deep is the 48TCWRT102?
A: It is 8.8 cm deep at the top and 16.7 cm deep at the bottom, 59.1 cm wide and 39 cm high, so it suits under-seat and behind-seat installs.
