Kicker 50TCWC102 Sub 10 Inch CompC Thin Profile Loaded Subwoofer Enclosure 250w
Couldn't Load Pickup availability
The Kicker 50TCWC102 is a thin-profile loaded subwoofer enclosure housing a 10" CompC driver, wired to a single 2 ohm terminal and rated at 125–250W RMS (500W peak). It is part of Kicker's CompC Loaded Enclosure range, designed to fit under or behind a seat in trucks and smaller cars.
This listing is the 2 Ohm (50TCWC102). The CompC 10" thin-profile enclosure is also available in 4 Ohm (50TCWC104).
Key specifications
- Subwoofer: 1 x 10" (25 cm) CompC, included
- Enclosure: thin profile, ported, custom port
- Impedance: single 2 ohm terminal
- Recommended power: 125–250W RMS, 500W peak
- Sensitivity: 91 dB 1W/1m
- Frequency response: 30–500 Hz, tuned at 35 Hz
- Dimensions: 54.6 cm W x 38.1 cm H x 11 cm top depth / 20 cm base depth
2 Ohm or 4 Ohm enclosure?
This is the 2 Ohm 50TCWC102. Choose it when your mono amplifier is 2 ohm stable and you want maximum power from one enclosure. For a 4 ohm load, or to run two enclosures in parallel down to 2 ohm, choose the 4 Ohm CompC 10" enclosure (50TCWC104).
10" CompC Thin Profile Loaded Enclosure
The CompC Loaded Enclosure uses a custom port to optimise subwoofer performance. Heavy MDF construction, thick black carpet finish and an emblazoned KICKER logo make it a straightforward install that looks the part.
- Designed to fit under or behind a seat
- CompC subwoofer reengineered for increased excursion and deeper bass
- Forced-Air Cooling™ for durability
- Custom port design
- Heavy MDF construction
- Spring-loaded speaker terminal
- Thick black carpet enclosure protection
- Emblazoned KICKER logo
Explore the full range in Kicker Loaded Subwoofer Enclosures.
Specification
| Frequency Response | (Hz) 30-500 |
|---|---|
| Sensitivity | (dB 1W/1m] 91 |
More specs
| |
What's Included
- Kicker 10" CompC Enclosure
Kicker
About the Kicker 50TCWC102
From our tech experts at CEN
The Kicker 50TCWC102 is a thin-profile loaded enclosure housing a 10" CompC subwoofer, rated at 125–250W RMS (500W peak) at a single 2 ohm load. The ported MDF enclosure measures 54.6 cm wide, 38.1 cm tall, and just 11 cm at its shallowest point, tuned to 35 Hz. It arrives ready to connect to an external mono amplifier.
Who it suits
Drivers in trucks or smaller cars who want genuine bass without sacrificing boot space. The 2 ohm wiring suits a mono amplifier that is 2 ohm stable. For a fully self-contained option, the Kicker Hideaway 51HS10 includes a built-in amplifier.
Our tech experts advise
Pair this enclosure with a mono amplifier delivering 125–250W RMS into 2 ohms; the Kicker KEY500.1 is a strong match. Measure your under-seat or behind-seat space carefully — the enclosure is 11 cm deep at the top and 20 cm at the base. Fitting is priced per vehicle; speak to our team at our Nottingham workshop for details.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from Kicker Loaded Subwoofer Enclosures
More options from the same range, in stock and ready to go
Best Seller Kicker 51PTRTP12 Powered Down Firing 12" Sub Active Subwoofer Enclosure 500w RMS £499.95 /In stock
Kicker 51PTRTP10 Powered Down Firing 10" Sub Active Subwoofer Enclosure 400w RMS £449.95 /Low stock
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Will the Kicker 50TCWC102 fit under or behind a seat?
A: It is a thin-profile enclosure designed to fit under or behind a seat. It is 11 cm deep at the top, 20 cm at the base, 38.1 cm high and 54.6 cm wide, so measure your space before ordering.
Q: How much power does the 50TCWC102 need?
A: Kicker recommends 125 to 250 watts RMS, with 500 watts peak power handling.
Q: Is the subwoofer included with the 50TCWC102?
A: Yes. It is a loaded enclosure supplied with a 10 inch CompC subwoofer already fitted.
