



Kicker 50DCWC122 Dual 12 Inch CompC Ported Loaded Subwoofer Enclosure 600w 2ohm
Couldn't Load Pickup availability
The Kicker 50DCWC122 is a ported loaded enclosure housing dual 12" CompC subwoofers, rated at 600W RMS with a single 2 ohm terminal. It is part of Kicker's CompC range, factory-tuned at 31 Hz and ready to install straight into a boot or SUV.
Key specifications
- Subwoofers: 2 x 12" (30 cm) CompC, included
- Impedance: single 2 ohm terminal
- Recommended power: 600W RMS, 1200W peak
- Sensitivity: 99.9 dB 1W/1m
- Tuning frequency: 31 Hz
- Dimensions: 81.0 cm W x 40.6 cm H x 35.6 cm top depth / 43.8 cm bottom depth
- Construction: heavy MDF, black carpet
Dual 12" CompC Enclosure 2 Ohm (50DCWC122)
A factory-tuned, ported enclosure loaded with dual 12" CompC subwoofers, ready to drop straight into your boot.
- Fits in a boot or SUV
- Genuine CompC subwoofers included
- Custom port design
- Heavy MDF construction
- Spring-loaded speaker terminal
- Thick black carpet protection
- Embroidered Kicker logo
Dual 12" CompC 2 Ohm Enclosure
The 50DCWC122 comes loaded with dual CompC 12" subwoofers wired to a single 2 ohm terminal, handling 600W RMS for straightforward connection to a compatible amplifier. The ported enclosure is factory-tuned, so there's no setup required — just install and play. If you'd prefer a single down-firing alternative, the Kicker 49L7TDF122 12" L7T down-firing loaded enclosure offers the same 600W rating in a different form factor.
Explore the full range in Kicker Loaded Subwoofer Enclosures.
Specification
| Impedance | (Ohms) 2 |
|---|---|
| Sensitivity | (dB 1w/1m) 99.9 |
More specs
| |
What's Included
- Kicker Dual 12" CompC Enclosure
Kicker
About the Kicker 50DCWC122
From our tech experts at CEN
The Kicker 50DCWC122 is a ported loaded enclosure housing dual 12" CompC subwoofers, rated at 600W RMS through a single 2 ohm terminal. Factory-tuned at 31 Hz, it measures 81.0 cm wide by 40.6 cm tall and is finished in black carpet over heavy MDF.
Who it suits
This suits drivers who want strong, deep bass without building a custom box. It is a good match for larger vehicles with plenty of boot space. For a down-firing alternative at the same power rating, see the Kicker 49L7TDF122.
Our tech experts advise
Check your boot dimensions before ordering — the enclosure is 81.0 cm wide and up to 43.8 cm deep at the bottom. You will need a mono amplifier capable of driving a 2 ohm load at 600W RMS. Fitting and wiring is priced per vehicle — contact our Nottingham team for details.
Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: Are the subwoofers included with the Kicker 50DCWC122?
A: Yes. It is a loaded enclosure supplied with two 12 inch CompC subwoofers already fitted.
Q: What amplifier does the 50DCWC122 need?
A: Use a mono amplifier that is stable at 2 ohms. Kicker recommends 600W RMS.
Q: How big is the 50DCWC122 enclosure?
A: It measures 81.0 cm wide, 40.6 cm high, 35.6 cm deep at the top and 43.8 cm deep at the bottom.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →

































