Dash Cam Hardwire Fuse Tap Kit Low Profile Mini Micro Standard Piggy Back Fuses
Couldn't Load Pickup availability
This is the CEN 8-piece add-a-circuit fuse tap kit, designed to hardwire a dash cam, sat nav or other 12V accessory directly from your vehicle's fuse box. The kit includes two each of low profile, mini, micro2 and standard ATO piggy back fuse holders, plus eight 10A fuses.
Key specifications
- Pieces: 8 fuse tap holders
- Holder types: 2x low profile, 2x mini, 2x micro2, 2x standard ATO
- Fuses included: 8x 10A
- Cable length: 120mm
- Connection: crimp connector included
- Use: dash cameras, battery packs and other 12V accessories
Dash camera hardwire fuse tap kit
These blade fuse holders let you add a protected circuit to an existing fuse slot, turning one slot into two and giving individual protection to each circuit. They're ideal for fitting aftermarket accessories such as dash cameras, sat navs and battery packs.
Great for hardwiring dash cameras, sat navs and more
- Suitable for dash cameras, battery packs or any other 12V accessories
- Includes crimp connector for easy installation
- Cable length: 120mm
- 8x 10A fuses included
Explore the full range in CEN Enclosures, Wiring & Accessories.
Specification
| Type | Wiring |
|---|---|
| Series | Piggy Back |
| Article Number | FUSETAP |
| Country of Manufacture | China |
More specs
| |
What's Included
- 2x Low Profile Fuse Tap Holder
- 2x Mini Fuse Tap Holder
- 2x Micro 2 Fuse Tap Holder
- 2x Standard ATO Fuse Tap Holder
- 8x 10A Fuse Included
CEN
About the CEN FUSETAP
From our tech experts at CEN
The CEN dash cam hardwire fuse tap kit is an 8-piece set of add-a-circuit piggy back holders for taking a fused 12V feed from your car's fuse box. It covers the four common blade sizes, with two each of low profile, mini, micro2 and standard ATO holders, plus eight 10A fuses and 120mm leads with crimp connectors.
Who it suits
Drivers hardwiring a dash cam, sat nav or other 12V accessory who do not yet know which fuse type their car uses. Having all four sizes in one kit means the job is not held up by the wrong holder.
Our tech experts advise
Pull an existing fuse to identify the type, then fit the original fuse in the lower slot of the tap and the 10A fuse for your accessory in the upper slot. Choose an ignition-switched circuit unless you want permanent power for parking mode, and make a solid earth to bare metal. See dash cam installation if you would rather we fit it.
Explore the full CEN range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all CEN
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
More from CEN Enclosures, Wiring & Accessories
More options from the same range, in stock and ready to go
Best Seller6.5 Inch VW Car Door Speaker Adapters for Volkswagen and Skoda SAVW30
£24.99
View product
Male ISO to Bare Power and Speaker Wire Car Stereo Radio Harness Adaptor Cable
£9.95
VW Volkswagen Transporter T5 T6 T6.1 Under Seat MDF Sub Box Subwoofer Enclosure
£149.00
VW Transporter Wheel Arch 10" Sub Subwoofer Enclosure for Volkswagen T5 T6 T6.1
£199.00
Staff PickVW Volkswagen Transporter T6 USB Port Retention Cable for Aftermarket Head Units
£40.00
Frequently Asked Questions
Q: Which fuse types does this fuse tap kit cover?
A: The kit includes two of each of the four common blade fuse types: low profile, mini, micro2 and standard ATO, so you can match the fuses used in your car's fuse box.
Q: What is included in the fuse tap kit?
A: 2x low profile fuse tap holders, 2x mini fuse tap holders, 2x micro2 fuse tap holders, 2x standard ATO fuse tap holders and 8x 10A fuses.
Q: Can I use this to hardwire a dash cam?
A: Yes. The fuse taps turn one fuse slot into two protected circuits, which makes them suitable for hardwiring dash cameras, battery packs such as the BlackVue Power Magic Pro, sat navs and other 12V accessories.
