Audiotec Fischer Conductor Control Input One Touch Remote Control H424489
Couldn't Load Pickup availability
The Audiotec Fischer CONDUCTOR (H424489) is a one-touch rotary remote control for BRAX, HELIX and MATCH DSP systems, handling volume, source selection, sound setup changes and optional Bluetooth HD Extension Card control. It is the Control Input version of the CONDUCTOR range.
This listing is the Control Input version (H424489). The CONDUCTOR is also available as the SCP version (H424479).
Key specifications
- Version: Control Input (H424489)
- Housing: ABS with machined aluminium knob
- Hardware: rotary encoder, 12 RGB LEDs and 48 MHz ARM processor
- Connection: single connector supply through MiniDIN
- Cable length: 5 m total (4.8 m connection cable plus 0.2 m CONDUCTOR cable)
- Dimensions (Ø x H): 46 x 28.7 mm
- Installation depth: 17 mm
- Software: DSP PC-Tool 4.75a or higher
One-touch remote control
A single knob gives you full control of your DSP sound system — volume adjustment, signal source selection, setup changes and control of an optionally installed Bluetooth HD Extension Card.
Tailor-made for your needs
The CONDUCTOR adapts to your setup, from a simple subwoofer remote to a controller for complex system configurations. It supports two independent playback zones with separate volume levels — useful for different audio in the front and rear of the vehicle.
All signal sources under control
Manage all connected signal sources quickly. Combined with the optional Bluetooth HD Extension Card, you can use a smartphone as a digital media source and control playback (play/pause, track forward/back) and volume directly from the CONDUCTOR.
Switch sound setups to suit your music
Cycle through DSP sound setups optimised for different genres — rock, pop, classical or neutral — so your system always sounds right for what you're listening to.
Seamless integration
The CONDUCTOR's compact, fully symmetrical design and quality materials allow it to integrate cleanly into most vehicle interiors, sitting as unobtrusively as an OEM control.
Explore the full range in Audiotec Fischer.
Specification
| Dimensions | (Ø x H) Ø 46 x 28.7 mm / Ø 1.81 x 1.13” |
|---|---|
More specs
| |
What's Included
- Remote control CONDUCTOR
- 4.80 m connection cable
Audiotec Fischer
About the Audiotec Fischer H424489
From our tech experts at CEN
Genuine Audiotec Fischer equipment, supplied and supported by CEN with full UK warranty.
Who it suits
Audiotec Fischer owners adding to or maintaining an existing system. Audiotec Fischer is the German house behind Helix, Match and Brax.
Our tech experts advise
If you are unsure whether this is right for your setup, get in touch and we will confirm before you order. See car audio installation.
Explore the full Audiotec Fischer range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Audiotec Fischer
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Audiotec Fischer Brands
High-End Car Hifi components from Audiotec Fischer
More from Audiotec Fischer
More options from the same range, in stock and ready to go
Popular Audiotec Fischer Conductor Pro One Touch Remote Control for Helix, Match DSP SCP £129.99 /In stock
Best Seller Audiotec Fischer Director SCP Version Touch Screen Display Remote H424499 £249.00 /In stock
Best Seller Audiotec Fischer Conductor SCP Version One Touch Remote Control H424479 £99.99 /In stock
Best Seller Audiotec Fischer URC.3 Remote Control for Brax, Helix and Match DSP Sub Volume £35.99 /In stock
Frequently Asked Questions
Q: Which DSPs work with the CONDUCTOR Control Input version?
A: It works with BRAX DSP and a range of HELIX and MATCH DSPs, including the HELIX DSP ULTRA, DSP.3, DSP MINI, V TWELVE DSP, V EIGHT DSP MK2, M SIX DSP and M FOUR DSP, and the MATCH M 5DSP MK2. Models such as the DSP PRO MK3, DSP.3S and MATCH UP 10DSP need the Control Input-to-SCP adaptor supplied with the DSP. DSP PC-Tool 4.75a or higher is required.
Q: Can I use the CONDUCTOR alongside another remote?
A: No. The CONDUCTOR cannot be combined with another control unit.
Q: What's in the box with the CONDUCTOR?
A: The CONDUCTOR remote control and a 4.80m connection cable.
