Shop All

Windscreen DAB Aerial SMB Window Antenna for Pioneer and Sony Car Stereos Radios

RRP £30.00 £20.00 Save 33% Popular
In stock
SKU: 91734MPN: DAB-A1
Part of the Connects 2 Accessories range · 6 products See the range →

The Connects2 DAB-A1 is an active windscreen film aerial with an SMB push-fit connector, designed for Pioneer and Sony aftermarket DAB head units. It forms part of the Connects2 aerial range.

Key specifications

  • Model: DAB-A1
  • Type: active windscreen film aerial with low noise amplifier
  • Connector: SMB push-fit (no screw)
  • Frequency: Band III 174 to 240 MHz, L-Band 1452 to 1492 MHz
  • Power supply: DC 9.0 to 16.0 V (12 V typical)
  • Cable: 0.8D, 3.5 m
  • Weight: approx. 45 g
  • Operating temperature: -30 to +80 degrees C

DAB-A1 glass windscreen mount antenna with SMB push-fit connection

The DAB-A1 is designed for aftermarket stereos with an SMB push-fit connection. It mounts directly to the windscreen as a discreet film aerial, so no hole needs drilling in the bodywork.

Key features

  • Active antenna
  • Band III reception
  • Low noise integrated amplifier
  • Earth bond contact for superior reception
Specification
StorageTemp. -40degrees~+85degrees
WeightApp.45g
Band III174~240MHz
L-Band1452~1492MHz
More specs
  • Operating Temp. -30degrees~+80degrees
  • Recommended temp. for ELEMENT installation +10degrees~30degrees, Less than 80%RH
  • Frequency Band
  • Power supply voltage DC+9.0~+16.0V (DC+12.0V Typ.)
  • Output Impedance 50 ohm
  • Cable type/length 0.8D/3.5m
  • Connector SMB type
What's Included
  • Connects 2 DAB-A1 Aerial
Product information

Connects 2

About the Connects 2 DAB-A1

From our tech experts at CEN

An aerial adaptor, converting between the vehicle’s aerial plug and the connector a new head unit expects.

Who it suits

Anyone fitting an aftermarket stereo, since factory aerial plugs differ by manufacturer and rarely match. Some vehicles also need a powered adaptor to keep an amplified aerial working.

Our tech experts advise

Adaptors are vehicle-specific and easy to get wrong, and poor reception after a fitting usually traces back to this part. get in touch. See car stereo installation.

Explore the full Connects 2 range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Connects 2

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Looking for Installation?

At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.

Get a quote

Frequently Asked Questions

Q: Will the DAB-A1 fit my stereo?

A: It is for aftermarket stereos with an SMB push-fit (no screw) aerial connection, such as Pioneer and Sony DAB units. Check your stereo's DAB aerial socket before ordering.

Q: Do I need to drill a hole to fit the DAB-A1?

A: No. It is a window film aerial that mounts on the glass, so no hole is needed in the bodywork. An earth bond contact is used for better reception, and the recommended installation temperature is +10 to +30 degrees C.

Q: How long is the DAB-A1 cable?

A: The cable is 3.5 m long (0.8D type) with an SMB connector.