Vibe Slick SLICK5C-V7 5.25 Inch 2 Way Component Car Speakers 80w RMS Pair
Couldn't Load Pickup availability
The Vibe Slick SLICK5C-V7 is a 5.25 inch 2-way component car speaker set from Vibe's Slick range, rated at 80W RMS and 240W peak, with 93dB sensitivity and a frequency response of 60Hz to 25kHz. Separate tweeters give better stereo imaging than a coaxial speaker, suited to factory 5.25 inch locations.
This listing is the 5.25 inch. The Vibe Slick component range is also available in 6.5 inch (SLICK6C-V7, 90W RMS).
Key specifications
- Size: 5.25 inch
- Type: 2-way component
- Power: 80W RMS, 240W peak
- Sensitivity: 93dB
- Frequency response: 60Hz to 25kHz
- Impedance: 4 ohms
- Mounting depth: 1.8 inch (46mm)
- Mounting diameter: 4.4 inch (112mm)
SLICK5C-V7 Slick 5.25 Inch 240 Watts 2 Way Component Speaker
The Vibe Slick range is Vibe's most efficient speaker lineup to date. The woofer uses a lightweight paper composite cone, foam surround, single layer spider and balanced voice coil. The 5.25 inch model features a 50mm tweeter, shared with the 5 x 7 inch and 6.5 inch models, delivering extended bandwidth and high efficiency.
The component tweeter uses high-end components in a compact design. Car & Hifi magazine described it as a force to be reckoned with, praising its detail and spatiality.
Explore the full range in Vibe Slick Speakers.
Specification
| Sensitivity | 93db |
|---|---|
| Frequency response | 60Hz - 25 kHz |
| Impedance | 4 ohm |
| Mounting depth | 1.8” (46mm) |
| Mounting diameter | 4.4” (112mm) |
More specs
| |
What's Included
- SLICK5C-V7
Vibe
About the Vibe SLICK5C-V7
From our tech experts at CEN
Vibe Slick 5.25 inch component speakers, with separate tweeters for mounting where you will actually hear them, rated at 80w RMS.
Who it suits
Drivers building a front stage who are happy for tweeters to be mounted separately, which usually means a professional fit. Slick is built for compact installs where space is tight.
Our tech experts advise
Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering. Door treatment matters as much as the speaker. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from Vibe Slick Speakers
More options from the same range, in stock and ready to go
Best SellerVibe Subwoofer 12 Inch Powerful Car Bass Sub 500w RMS Dual 2 ohms SLICK12D2-V3
RRP £150.00Save 7%£139.00
Vibe Slick SLICK1-V4 2 Inch Car Component Silk Dome Tweeters 50w RMS Pair
£34.99
Vibe Slick SLICK5-V7 5.25 Inch 2 Way Coaxial Car Speakers 70w RMS Pair
£69.99
Vibe Subwoofer Enclosure Slick MIT 12 Inch Passive Car Sub Bass Box 500w RMS
£259.99
Vibe Slick SLICK12D4-V3 12 Inch Bass Sub Dual 4 Ohm Car Subwoofer 500w RMS
£149.99
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: How much power can the Vibe SLICK5C-V7 component speakers handle?
A: They are rated at 80W RMS and 240W peak, with a 4 ohm impedance and 93dB sensitivity.
Q: What mounting depth does the SLICK5C-V7 woofer need?
A: The woofer needs a mounting depth of 1.8 inch (46mm) and a mounting diameter of 4.4 inch (112mm).
Q: What frequency range does the SLICK5C-V7 cover?
A: The SLICK5C-V7 has a frequency response of 60Hz to 25kHz.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →