Vibe Slick SLICK693-V7 6x9 Inch 3 Way Coaxial Car Speakers 160w RMS Pair
Couldn't Load Pickup availability
The Vibe Slick SLICK693-V7 is a pair of 6x9 inch 3-way tri-axial coaxial car speakers with dual tweeters, rated at 160W RMS and 480W peak, with 90dB sensitivity and a frequency response of 50Hz to 25kHz. Part of the Vibe Slick range, they suit rear shelf and factory 6x9 locations that need plenty of output.
Key specifications
- Size: 6x9 inch
- Type: 3-way tri-axial coaxial
- Tweeters: dual
- Power: 160W RMS, 480W peak
- Sensitivity: 90dB
- Frequency response: 50Hz to 25kHz
- Impedance: 4 ohms
- Mounting depth: 3 inch (76mm)
- Mounting size: 5.7 x 8.5 inch (145mm x 215mm)
SLICK693-V7 Slick 6x9 Inch 480 Watts Coaxial Speaker with Dual Tweeter
The Vibe Slick range are the most efficient Vibe speakers to date. The woofer uses a super lightweight paper composite cone and foam surround, a single layer spider and a perfectly balanced voice coil. The 6x9 model features a 40mm dual tweeter configuration, delivering extended bandwidth and high efficiency. If you need a door speaker to complement these, the Vibe Slick range is also available as the Vibe Slick 6C V7 6.5 inch 2-way component speaker at 90W RMS.
The tweeter uses high-end components in a compact design. Car & Hifi magazine noted it delivers great detail and good spatiality.
Explore the full range in Vibe Slick Speakers.
Specification
| Sensitivity | 90dB |
|---|---|
| Frequency response | 50Hz – 25 kHz |
| Impedance | 4 Ω |
| Mounting depth | 3″ (76mm) |
| Mounting diameter | 5.7x8.5″ (145mm x 215mm) |
More specs
| |
What's Included
- SLICK693-V7
Vibe
About the Vibe SLICK693-V7
From our tech experts at CEN
Vibe Slick 6x9 inch coaxial speakers, with the tweeter in the centre of the woofer, rated at 160w RMS.
Who it suits
Drivers replacing tired factory speakers who want a clear improvement without complication. Slick is built for compact installs where space is tight.
Our tech experts advise
Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering. Door treatment matters as much as the speaker. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from Vibe Slick Speakers
More options from the same range, in stock and ready to go
Best SellerVibe Subwoofer 8 Inch Powerful Car Bass Sub 450w RMS Dual 2 ohms SLICK8D2-V3
RRP £99.99Save 20%£79.99
Vibe Slick SLICK57-V7 5x7 Inch 2 Way Coaxial Car Speakers 80w RMS Pair
£69.99
Vibe Subwoofer Enclosure Slick MIT Twin 12 Inch Passive Sub Bass Box 1000w RMS
£449.99
Vibe Subwoofer 10 Inch Powerful Car Bass Sub 500w RMS Dual 2 ohms SLICK10D2-V3
£124.99
Vibe Slick SLICKPRO8M-V0 8 Inch Pro Audio Midrange Speakers 150w RMS Pair
£79.99
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: How much power can the Vibe SLICK693-V7 speakers handle?
A: They are rated at 160W RMS and 480W peak, with a 4 ohm impedance and 90dB sensitivity.
Q: What mounting depth do the SLICK693-V7 speakers need?
A: They need a mounting depth of 3 inch (76mm) and a mounting area of 5.7 x 8.5 inch (145mm x 215mm).
Q: Does the SLICK693-V7 have more than one tweeter?
A: Yes. The SLICK693-V7 is a 6x9 inch coaxial speaker with a dual tweeter design.
Q: Are the Vibe SLICK693-V7 speakers 2-way or 3-way?
A: They are 3-way tri-axial 6x9 inch coaxial speakers, with dual tweeters alongside the woofer.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →