







Vibe Slick 6C V7 6.5" 17cm 2 Way Car Door Component Speakers 90w RMS
Couldn't Load Pickup availability
The Vibe Slick 6C V7 (SLICK6C-V7) is a 6.5" (17cm) 2-way component speaker set from Vibe's Slick range, rated at 90W RMS (270W peak) with 94dB sensitivity. Designed as a factory door speaker replacement, it suits both head unit and amplifier-driven installs.
Key specifications
- Size: 6.5" (17cm) 2-way component
- Power: 90W RMS, 270W peak
- Sensitivity: 94dB
- Frequency response: 54Hz – 25kHz
- Impedance: 4 ohm
- Tweeter: 50mm
- Mounting depth: 61mm (2.4")
- Mounting diameter: 142mm (5.6")
- Award: Best Product Mittelklasse, Car & Hifi magazine
Slick 6.5 inch component speaker
- 6.5" high-efficiency speaker
- Designed to replace factory speakers
- SQ-focused sound
British-engineered 2-way component speaker
The Vibe Slick range is Vibe's most efficient speaker range to date. The woofer uses a super-lightweight paper composite cone with foam surround, a single-layer spider, and a balanced voice coil.
The 6.5" model features a 50mm tweeter, delivering extended bandwidth and high efficiency. Smaller models in the Slick range use a 40mm tweeter.
The compact component tweeter uses high-end components and, according to Car & Hifi magazine, provides great detail and good spatiality — earning a Best Product Mittelklasse award in the process.
Explore the full range in Vibe Slick Speakers.
Specification
| Sensitivity | 94dB |
|---|---|
| Frequency response | 54Hz – 25 kHz |
| Impedance | 4 ohm |
| Mounting depth | 2.4″ (61mm) |
| Mounting diameter | 5.6″ (142mm) |
| Weight | 2.13 kg |
| Dimensions | 25.2 × 19.6 × 17.5 cm |
More specs
| |
What's Included
- Vibe SLICK6C-V7 Speakers
Vibe
About the Vibe SLICK6C-V7
From our tech experts at CEN
The Vibe Slick 6C V7 (SLICK6C-V7) is a 6.5" (17cm) 2-way component speaker set rated at 90W RMS and 270W peak, with a 94dB sensitivity rating. It uses a lightweight paper composite cone with a 50mm tweeter and runs at 4 ohm impedance. The set earned a Best Product Mittelklasse award from Car Hifi magazine.
Who it suits
These speakers suit drivers replacing flat-sounding factory speakers with a genuine improvement in detail and soundstage. They work well driven from a head unit alone, or paired with a 4-channel amplifier such as the Vibe Powerbox 65.4M for greater headroom.
Our tech experts advise
Check your door cavity allows the 61mm mounting depth and 142mm mounting diameter before ordering. The 4 ohm impedance is compatible with most factory and aftermarket head units. Installation cost varies by vehicle; contact our Nottingham fitting team for a quote.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: What mounting depth does the Vibe Slick 6C V7 need?
A: The woofers need 61mm (2.4") of mounting depth and a 142mm (5.6") mounting diameter.
Q: What size tweeter does the Slick 6C V7 use?
A: The 6.5 inch Slick component set uses a 50mm tweeter for extended bandwidth and high efficiency.
Q: Are grilles included with the Slick 6C V7?
A: Yes, grilles are included.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →





































