Vibe Pulse PULSE6-V3 6.5 Inch 2 Way Coaxial Car Speakers 60w RMS Pair
Couldn't Load Pickup availability
The Vibe Pulse PULSE6-V3 is a pair of 6.5 inch (165mm) 2-way coaxial car speakers rated at 60W RMS and 180W peak, from Vibe's entry-level Pulse range. They feature PEI dome tweeters, IMPP polypropylene woofer cones and included steel mesh grilles, with 91dB sensitivity for efficient use without an amplifier upgrade.
Key specifications
- Size: 6.5 inch (165mm)
- Type: 2-way coaxial
- Power: 60W RMS, 180W peak
- Sensitivity: 91dB
- Frequency response: 65Hz to 20kHz
- Impedance: 4 ohms
- Mounting depth: 2.1 inch (53mm)
- Mounting diameter: 5.6 inch (141mm)
- Grilles: included
PULSE6-V3 Pulse 6.5 Inch 180 Watts Coaxial Speakers
The Pulse series is Vibe's entry-level car audio range. The PULSE6-V3 coaxial speakers are designed to be highly efficient, delivering a strong response from a standard head unit without needing an amplifier upgrade. If you want a step up in power and separation, Vibe also offer the Vibe Slick 6C V7 6.5 inch 2-way component speakers at 90W RMS.
Features
- PEI dome tweeters deliver extended high-frequency response.
- Steel mesh grille protects the woofer cone.
- IMPP polypropylene woofer cone provides smooth low bass and clear vocal reproduction.
Recommended amplifier: Vibe POWERBOX100.4-V0.
Explore the full range in Vibe Pulse.
Specification
| Configuration | 2 way |
|---|---|
| Speaker Size | 6.5″ (165mm) |
| RMS Power | 60 watts |
| Peak Power | 180 watts |
| Sensitivity | 91dB |
| Frequency Response | 65 Hz – 20 kHz |
| Impedance | 4 Ohms |
| Mounting Depth | 2.1″ (53mm) |
| Mounting Diameter | 5.6″ (141mm) |
| Grille included | Yes |
| Recommended Amplifer | POWERBOX100.4-V0 |
What's Included
- PULSE6-V3
Vibe
About the Vibe PULSE6-V3
From our tech experts at CEN
Vibe Pulse 6.5 inch coaxial speakers, with the tweeter in the centre of the woofer, rated at 60w RMS.
Who it suits
Drivers replacing tired factory speakers who want a clear improvement without complication. Pulse is the accessible end of the range and a straightforward upgrade.
Our tech experts advise
Sizes, adapter rings and harnesses vary by vehicle, year and trim, so we confirm what your car takes before ordering. Door treatment matters as much as the speaker. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Vibe range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
More from Vibe Pulse
More options from the same range, in stock and ready to go
Vibe Pulse PULSE5-V3 5.25 Inch 2 Way Coaxial Car Speakers 50w RMS Pair
£34.99
View product
Vibe Pulse PULSE4-V3 4 Inch 2 Way Coaxial Car Speakers 40w RMS Pair
£29.99
Vibe Pulse PULSEMIT10-V5 Passive 10 Inch Subwoofer Bass Enclosure 350w RMS
£199.99
Vibe Pulse PULSE12D2-V3 12 Inch Bass Sub Dual 2 Ohm Car Subwoofer 350w RMS
£119.99
Vibe Pulse PULSE10D2-V3 10 Inch Bass Sub Dual 2 Ohm Car Subwoofer 350w RMS
£109.99
Frequently Asked Questions
Q: Will these speakers fit my car?
A: Most car speakers are standard sizes, but mounting depth and fitting rings vary by vehicle. Check the size in the Specification tab against your vehicle, or contact CEN with your registration and we will confirm fitment and any adapters or fitting kits you need.
Q: Do I need an amplifier to run these speakers?
A: Not always. Most speakers will run from a standard head unit, but a dedicated amplifier lets them perform at their best, particularly for component sets and higher power handling models. The RMS figure in the Specification tab is the guide to how much clean power they can use.
Q: What is the difference between coaxial and component speakers?
A: Coaxial speakers combine the tweeter and woofer in one unit for a simple like-for-like upgrade. Component sets separate the tweeter and woofer with a crossover for better imaging and detail, and suit installs where sound quality is the priority.
Q: Do these come as a pair?
A: Unless stated otherwise, car speakers are sold in pairs. Check the product title and What's Included tab, which lists exactly what is in the box.
Q: Can CEN fit these speakers for me?
A: Yes. CEN offers professional installation from our Nottingham premises. Contact us to book an installation slot or ask for a fitting quote.
Q: How much power can the Vibe PULSE6-V3 speakers handle?
A: They are rated at 60W RMS and 180W peak, with a 4 ohm impedance and 91dB sensitivity.
Q: What mounting depth do the PULSE6-V3 speakers need?
A: They need a mounting depth of 2.1 inch (53mm) and a mounting diameter of 5.6 inch (141mm).
Q: Which amplifier is recommended for the PULSE6-V3?
A: Vibe recommends the POWERBOX100.4-V0 amplifier for these speakers, although they can also run from a standard head unit.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →
Car Audio
New at CEN: Option Audio Drive-10Flat — Golf Mk8 Bass, Zero Boot Space Lost
Read more →
Car Audio
Car Speaker Sizes Explained: What Fits Your Car
Read the guide →
Car Audio
Alpine iLX-F905D Halo9 Review: The Big-Screen Upgrade for Almost Any Car
Read more →