Vibe Cven CVEN10SW-V7 10 Inch Sub SQ Component 4 Ohm Subwoofer 400w RMS
Couldn't Load Pickup availability
CVEN10SW-V7 10 Inch 800 Watts High End SQ Component Subwoofer
- Extreme overhung voice coil with +/-16mm of linear stroke to ensure lowest distortion at very high drive levels.
- FEA optimised suspension for improved symmetry and lower distortion.
- Very large motor structure with 2.5” voice coil for better control and power handling.
- Balanced drive motor for optimal drive force symmetry resulting in largely reduced even order harmonic distortion.
- Extremely rigid aluminium cone to ensure linear piston motion at high levels and for better heat transfer at high continuous power levels.
- Dual-spider design for higher mechanical durability and high-excursion stability.
- Rigid die cast Aluminium chassis with extensive venting for lower air flow speed reducing audible distortion.
- Vented centre pole with dual flares for reduced noise level at large cone excursions.
- Heavy-duty fibre glass voice coil former to reduce mechanical losses resulting in better dynamic performance and low-level details.
- Built-in aluminium field-stabilising ring for reduced distortion at high levels
- Low-loss suspension (high Qm) for better reproduction of details and dynamics.
- Black plated motor parts for better heat transfer to the surrounding air.
- Conex spider for better durability under extreme conditions.
- Delivered with foam gasket attached for hassle-free mounting and secure cabinet sealing.
Can be used for bass reflex and sealed applications. When sound quality is paramount look no further than the VIBE CVEN 10 SW, a subwoofer built specifically for sound quality.
Two internally built-in aluminium rings for stabilising the magnetic field, providing lower high-level distortion linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions.
Extremely rigid aluminium cone to ensure linear piston motion at high levels and for better heat transfer at high continuous power levels.
Specification
| Impedance | 4 ohm |
|---|---|
| Sensitivity | 84 dB |
| Frequency response | 25Hz – 1.5kHz |
| Mounting depth | 5.8″ (148mm) |
| Mounting diameter | 8.9″ (227mm) |
| Enclosure volume | 0.75 - 1.5 cubic feet |
More specs
| |
What's Included
- CVEN10SW-V7
FAQs
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
About the brand
Vibe
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
Recently Viewed
Jump back to the products you've been checking out
