Shop All

NOCO GC002 X-Connect Eyelet Terminal Connector for Genius 1 2 5 10 & G Series

£22.95 Out of stock
Out of Stock
SKU: 92191MPN: GC002
Part of the range · 28 productsPart of the NOCO Cables & Cases range · 28 products See the range →

The NOCO GC002 X-Connect Eyelet Terminal Connector uses M6 (1/4 inch) eyelets to bolt permanently to a battery, creating a quick plug-in point for NOCO Genius and G Series chargers. It includes a 20 A mini blade fuse and 16 AWG wire with an overall length of 24 in (61 cm). Part of the NOCO X-Connect accessory range.

For batteries with M10 (3/8 inch) terminal holes, see the GC008 X-Connect XL Eyelet Terminal Connector.

Key specifications

  • Compatible with: GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2x2, GENIUS2x4 and G750, G1100, G3500, G4, G7200 (all versions)
  • Not compatible with: NOCO Boost UltraSafe lithium jump starters
  • Input: X-Connect female
  • Output: M6 (1/4 inch) eyelet terminals
  • Fuse: 20 A mini blade
  • Wire size: 16 AWG
  • Overall length: 24 in (61 cm); cable length 18.5 in (47 cm)

GC002 X-Connect Eyelet Terminal Connector

The GC002 eyelets are compatible with a wide range of NOCO Genius chargers, whether as a replacement connector or to set up a permanent connection on an additional vehicle.

Compatible with

  • G750 (All Versions)
  • G1100 (All Versions)
  • G3500 (All Versions)
  • G4 (All Versions)
  • G7200 (All Versions)
  • GENIUS1
  • GENIUS2
  • GENIUS2x2
  • GENIUS2x4
  • GENIUS5
  • GENIUS10
  • Not compatible with NOCO Boost UltraSafe lithium jump starters.

X-Connect Eyelet Terminal Connector

The X-Connect Eyelet Terminal gives a charger a quick, reliable connection to any battery. Permanently mount one on a motorcycle, ATV, snowmobile, personal watercraft, lawn mower or any vehicle you charge regularly, and simply plug in your Genius charger whenever needed.

M6 eyelet connectors for Genius chargers

The GC002's M6 eyelets mate directly with the X-Connect on Genius chargers. Hard-mount them to the battery terminals once and you have a convenient, ready-to-use connection for daily charging and battery maintenance.

Permanent, hard-mount connection

Leave the GC002 fixed to the battery terminals and move your Genius charger freely between vehicles. One eyelet set per battery means no fiddling with crocodile clips each time.

Built-in 20 A fuse protection

A built-in 20 A mini-blade fuse provides safety and overcurrent protection. The current NOCO 20 A fuse is 45% smaller than the previous NOCO 10 A fuse.

Specification
TypeWiring
SeriesGenius
Article NumberGC002
Country of ManufactureChina
More specs
  • Input X-Connect Female
  • Output M6 (1/4-Inch) Eyelet Terminals
  • Fuse 20 Amp Mini Blade
  • Wire Size 16 AWG
  • Overall Length 24in (61cm)
  • Cable Length 18.5in (47cm)
  • G1100 (All Versions)
  • G3500 (All Versions)
  • G4 (All Versions)
  • G7200 (All Versions)
  • G750 (All Versions)
  • GENIUS1
  • GENIUS10
  • GENIUS2
  • GENIUS2x2
  • GENIUS2x4
  • GENIUS5
  • Not compatible with NOCO Boost UltraSafe Lithium Jump Starters.
What's Included
  • NOCO X-Connect GC002 Eyelet Terminal Connector

NOCO

About the NOCO GC002

From our tech experts at CEN

The NOCO GC002 X-Connect Eyelet Terminal Connector bolts permanently to a battery via M6 (1/4 inch) eyelets, providing a quick plug-in point for compatible NOCO Genius and G Series chargers. It has an overall length of 61 cm, uses 16 AWG wire, and includes a built-in 20 A mini blade fuse for overcurrent protection.

Who it suits

It suits anyone who regularly charges a motorcycle, ATV, lawn mower or second vehicle with a NOCO Genius charger and wants to avoid attaching crocodile clips each time. For batteries with M10 (3/8 inch) terminal holes, the GC008 XL Eyelet Terminal Connector is the correct choice instead.

Our tech experts advise

Check your battery's terminal hole size before ordering — M6 is standard on most motorcycle and leisure batteries. This connector is not compatible with NOCO Boost UltraSafe lithium jump starters, so confirm your charger model first. If the charger needs to reach a battery in a tight location, the GC004 X-Connect 10 ft Extension Cable adds useful extra length.

Explore the full NOCO range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all NOCO

Frequently Asked Questions

Q: Which chargers is the GC002 compatible with?

A: NOCO GENIUS1, GENIUS2, GENIUS5, GENIUS10, GENIUS2x2 and GENIUS2x4, plus the G750, G1100, G3500, G4 and G7200 (all versions). It is not compatible with NOCO Boost jump starters.

Q: Can the GC002 stay fitted to my battery?

A: Yes. It is designed to be left hard-mounted to the battery terminals so you can plug in a Genius charger and move it between batteries easily.

Q: What eyelet size does the GC002 use?

A: M6 (1/4 inch) eyelet terminals.