Shop All

Morel Ultimo TI 122 12inch Subwoofer 2 Ohm Voice Coils 1000w

£1,249.99 Out of stock
Out of Stock
SKU: 91212MPN: ULTIMO TI 122
Part of the range · 29 productsPart of the Morel Subwoofers range · 29 products See the range →

The Morel Ultimo TI 122 is a 12 inch (300 mm) car subwoofer with a single 2 ohm voice coil, rated at 1000 W RMS / 3000 W peak. It is part of Morel's flagship Ultimo Titanium subwoofer range, built around a titanium voice coil former and a 5.1 inch Hexatech External Voice Coil for low-distortion, high-resolution bass.

This listing is the 2 ohm version. The Ultimo TI 12 inch is also available as the 4 ohm Ultimo TI 124.

Key specifications

  • Size: 12 inch (300 mm)
  • Impedance: single 2 ohm voice coil
  • Power handling: 1000 W RMS (3000 W peak)
  • Sensitivity (1 W / 1 m): 87 dB
  • Frequency response: 10 – 900 Hz
  • Dimensions: 30.5 x 30.5 x 14.7 cm
  • Mounting depth: 14.1 cm
  • Mounting hole diameter: 27 cm
  • Grille included

Ultimo TI 12" (300 mm) Subwoofer — 1000 W at 2 Ohm

The Ultimo Titanium is Morel's current flagship subwoofer series, building on the musicality and power handling the original Ultimo range established.

At the core of the Ultimo TI 122 is a titanium voice coil former — exceptionally stiff and lightweight — which improves transient response, reduces distortion and increases power handling. Paired with a 5.1 inch Hexatech™ External Voice Coil (EVC™), it delivers the high-excursion performance the Ultimo series is known for.

A copper shorting ring reduces distortion and flattens impedance response — particularly valuable in subwoofer applications where distortion levels are inherently high. The DMM™ (Dual Magnet Motor) motor design achieves over 90% efficiency, while PFS™ (Progression Field Symmetry) spider/surround technology stiffens the spider as excursion increases, maintaining linearity and minimising distortion throughout the bass range.

Continued parameter optimisation means the Ultimo Titanium series works effectively in smaller enclosures than its predecessors, without compromising performance. If you're looking for a smaller alternative in the Ultimo PS range, the Morel Ultimo PS 104D 10 inch subwoofer is also available.

Specification
Impedance(Ohms) 2
Sensitivity(dB @ 1W/1m) 87
Frequency Response(Hz) 10-900
Mounting Depth(cm) 14.1
More specs
  • Style Round
  • Voice Coils Single
  • RMS Power (W) 1000
  • Peak Power (W) 3000
  • Height (cm) 30.5
  • Width (cm) 30.5
  • Depth (cm) 14.7
  • Mounting Hole Diameter (cm) 27
  • Grills Included
What's Included
  • ULTIMO TI 12" (300 MM) SUBWOOFER 1000W @ 2 OHM
Product information

Morel

About the Morel ULTIMO TI 122

From our tech experts at CEN

The Morel Ultimo TI 122 is a 12 inch (300 mm) car subwoofer from Morel's flagship Ultimo Titanium range. It uses a single 2 ohm voice coil and handles 1000 W RMS (3000 W peak), built around a titanium voice coil former and a 5.1 inch Hexatech External Voice Coil for low-distortion bass. Sensitivity is 87 dB and frequency response runs from 10 to 900 Hz. A grille is included.

Who it suits

This subwoofer is well matched to enthusiasts wanting high-excursion, high-power bass from a 12 inch driver, including in smaller enclosures than traditional designs permit. If your amplifier is wired for a 4 ohm load, the Morel Ultimo TI 124 offers the same power handling at 4 ohm impedance.

Our tech experts advise

Check your enclosure against the 27 cm mounting hole diameter and 14.1 cm mounting depth before ordering. Confirm your amplifier can drive a 2 ohm load stably — mismatched impedance will limit performance. Car audio installation is priced per vehicle; see our Nottingham fitting page for details.

Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: Is the Morel Ultimo TI 122 a single or dual voice coil subwoofer?

A: It has a single 2 ohm voice coil.

Q: How much power does the Ultimo TI 122 handle?

A: It is rated at 1000 W RMS and 3000 W peak.

Q: What mounting depth does the Ultimo TI 122 need?

A: Mounting depth is 14.1 cm with a mounting hole diameter of 27 cm. A grille is included.