Morel MPS 5.950 Amp 5 Channel Amplifier 4x70w + Mono Sub 1 x 550w RMS at 2ohm
Couldn't Load Pickup availability
The Morel MPS 5.950 is a 5-channel car amplifier from Morel's MPS range, delivering 70W RMS x 4 (Class AB) plus 550W RMS x 1 (Class D) at 2 ohms, designed to power a full speaker and subwoofer system from a single unit.
Sub level can be controlled remotely with the optional Morel MPS-R1. For a speakers-only solution, see the Morel MPS 4.400 4-channel amplifier.
Key specifications
- Power at 4 ohms: 70W RMS x 4 + 350W RMS x 1
- Power at 2 ohms: 100W RMS x 4 + 550W RMS x 1
- 3-channel mode: 200W RMS x 2 bridged at 4 ohms + 550W RMS x 1 at 2 ohms
- Class: AB (front/rear channels), D (sub channel)
- S/N ratio: 100dB
- Distortion: 0.05% (front/rear), 0.15% (sub)
- Speaker channel filters: high- and low-pass, 40–400Hz, 12dB/octave
- Sub channel LPF: 40–220Hz, 12dB/octave
- Bass boost: 0–12dB at 45Hz
- Subsonic filter: off / 25Hz / 35Hz
- Recommended wiring: 4-gauge power and ground, 80A fuse
- Dimensions: 19-1/4" W x 2-1/8" H x 6-3/4" D (including flange)
Power station
The MPS 5.950 sends 70W RMS to each of four speaker channels plus 550W RMS to a subwoofer, powering a full system from its 18-5/16" chassis. In 3-channel mode it delivers 200W RMS to two speakers while still supplying 550W RMS to a sub.
Low-noise design
Class AB architecture on the front and rear channels keeps distortion low. The Class D sub channel delivers clean output with minimal noise. Balanced differential inputs reject interference, and an onboard microprocessor manages thermal control to keep the amp running steadily under load. All connections are on one side of the unit for tidy installation.
Tone controls for every occasion
High-pass, low-pass, subsonic filter, bass boost, and gain controls are housed under a protected top panel, making it straightforward to match the amp's output to your speakers and subwoofer.
- 5-channel car amplifier
- 70W RMS x 4 + 350W RMS x 1 at 4 ohms
- 100W RMS x 4 + 550W RMS x 1 at 2 ohms
- 200W RMS x 2 bridged at 4 ohms + 550W RMS x 1 at 2 ohms
- Class AB (front/rear), Class D (sub)
- 100dB signal-to-noise ratio; 0.05% THD (front/rear), 0.15% THD (sub)
- Variable high- and low-pass filters (40–400Hz, 12dB/octave) on front and rear channels
- Variable low-pass filter (40–220Hz, 12dB/octave) on sub channel
- Variable bass boost (0–12dB at 45Hz) on sub channel
- Switchable subsonic filter (off / 25Hz / 35Hz) on sub channel
Other features
- Preamp and speaker-level inputs
- Speaker-level inputs require speaker wire to RCA adapters
- Speaker-level inputs support DC offset or signal-sensing turn-on
- Optional MPS-R1 wired remote bass level control available
- Wiring, fuse, and hardware not included
- 4-gauge power and ground wires and an 80A fuse recommended
- Dimensions: 19-1/4" W (including flange) x 2-1/8" H x 6-3/4" D
Explore the full range in 5 Channel Amplifiers.
Specification
| Series | MPS |
|---|---|
| Article Number | MPS 5.950 |
| Country of Manufacture | China |
More specs
| |
What's Included
- 5-Channel amplifier
- Four 5/8" Screws
- Two M4x4mm Machine screws (top panel replacement screws)
- 2mm Allen wrench
- 2.5mm Allen wrench
- 4mm Allen wrench
- Owner's manual
Morel
About the Morel MPS 5.950
From our tech experts at CEN
A 5-channel amplifier, rated at 550w RMS.
Who it suits
Drivers who have upgraded their speakers and found the head unit cannot drive them properly.
Our tech experts advise
Matching matters more than headline watts, and the gains want setting with a meter rather than by ear. It also needs a fused feed from the battery on the correct cable gauge. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full Morel range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Morel
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing
Looking for Installation?
At CEN we take pride in being able to share the quality of our work as well as being able to show what incredible products we have installed week on week.
More from 5 Channel Amplifiers
More options from the same range, in stock and ready to go
Save 10% Best Seller Match M 5.4DSP Amp 5 Channel Amplifier with Integrated 64 Bit 9 Channel DSP RRP£574.99£519.99 / Save 10%In stock
Best Seller Audison SR 5.600 V2 Amp 5 Channel High Power Compact Speaker Amplifier 1010w RMS £499.99 /In stock
JL Audio HD900/5 HD Series 5 Channel Class D Full Range Amp Amplifier 900w RMS £1,379.00 /Low stock
Save 4% Kicker 46CXA660.5 Amp 5 Channel Class A/B Full Range Car Amplifier up to 660w RMS RRP£469.95£449.95 / Save 4%Low stock
Frequently Asked Questions
Q: How do I choose the right amplifier for my speakers or subwoofer?
A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.
Q: What wiring do I need to install this amplifier?
A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.
Q: What class of amplifier is this and does it matter?
A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.
Q: Will an amplifier work with my factory head unit?
A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.
Q: Can CEN install this amplifier?
A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.
Q: Can the Morel MPS 5.950 run in 3-channel mode?
A: Yes. Bridging the front and rear channels gives 200W RMS x 2 into 4 ohms, while the sub channel still delivers 550W RMS into 2 ohms.
Q: Is there a bass remote for the MPS 5.950?
A: Yes. The optional Morel MPS-R1 wired remote bass level control is compatible with the MPS 5.950.
Q: What is in the box with the MPS 5.950?
A: The amplifier, four 5/8" screws, two M4x4mm machine screws, 2mm, 2.5mm and 4mm Allen wrenches and the owner's manual. Wiring, fuse and hardware are not included.
