Shop All

Kicker 46CXA660.5 Amp 5 Channel Class A/B Full Range Car Amplifier up to 660w RMS

RRP £469.95 £449.95 Save 4%
Low stock
SKU: 91103MPN: 46CXA6605
Part of the range · 29 productsPart of the Kicker Amplifiers range · 29 products See the range →

The Kicker 46CXA660.5 is a 5-channel Class A/B full-range car amplifier delivering up to 660W RMS — part of Kicker's CX Series. It provides four full-range channels at up to 90W RMS each, plus a Class D subwoofer channel at up to 300W RMS, allowing a complete system to run from a single unit.

Sub level can be adjusted from the dash with the optional 46CXARC remote bass control.

Key specifications

  • Channels: 5 (4 x Class A/B full range, 1 x Class D sub)
  • Full-range power: 65W x 4 at 4 ohms, 90W x 4 at 2 ohms
  • Bridged power: 180W x 2 at 4 ohms
  • Sub channel power: 150W at 4 ohms, 300W at 2 ohms
  • Crossovers: high-pass 10–200 Hz (amp 1–2), sub low-pass 50–200 Hz, 12 dB/octave
  • Subsonic filter: 25 Hz at 24 dB/octave; KickEQ 0–6 dB at 40 Hz
  • Inputs: 125 mV–5 V low level, 1–40 V high (speaker) level
  • Dimensions: 5.9 x 17 x 35.7 cm (H x W x L)

46CXA660.5 5-Channel Amplifier

CX Series amps achieve high power through an optimised circuit layout and high-grade internal components. Efficient heat sinks keep temperatures in check, and the optional remote level control lets you adjust bass on the fly.

Five Channels of Fun

The CXA660.5 uses Class A/B technology across four mid/high-range channels and a Class D power plant for the bass channel. FIT+™ (Fail-safe Integration Technology-PLUS) ensures compatibility with nearly every head unit.

KickEQ™ variable bass boost adds up to 6 dB of extra bass with a turn of the knob. A 12 dB crossover and 24 dB subsonic filter let you tune the whole system quickly.

  • Class A/B full-range channels
  • Class D bass channel — one amp to run an entire system
  • Three-second turn-on/off delay to eliminate unwanted interference
  • Variable 12 dB crossovers for precise sound tuning
  • KickEQ™ 6 dB variable bass boost for additional low frequencies
  • 24 dB subsonic filter to protect against potentially damaging frequencies
  • FIT+™ (Fail-safe Integration Technology-PLUS) for near-universal head unit compatibility
  • Accepts up to 40-volt input signal
  • Compact footprint for easier installation
  • Vertical mounting hardware included
Specification
Dimensions(in, cm) (all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L) 14-1/8, 35.7
Frequency Response(Hz) 10Hz-20kHz
Frequency Response(Hz – Sub Ch.) 25Hz-200Hz
Input Sensitivity125mV–5V (Low Level) 1V–40V (High Level)
Signal-to-Noise Ratio90dB
Active CrossoverAmp 1-2: High Pass 10-200Hz @ 12dB/Octave Sub Channel: Low Pass 50-200Hz @ 12dB/Octave
Subsonic Filter25Hz @24dB/Octave
More specs
  • MODEL CXA660.5
  • Power (watts/ch) 4 Ohm Stereo 65x4
  • Power (watts/ch) 2 Ohm Stereo 90x4
  • Power (watts/ch) 4 Ohm Bridged 180x2
  • Power (watts/ch) 4 Ohm Mono Sub Ch 150x1
  • Power (watts/ch) 2 Ohm Mono Sub Ch 300x1
  • CXARC Remote Bass Capable (sold sep.) yes
  • KickEQ™ Boost Variable 0-6dB @40Hz
What's Included
  • CXA660.5 5 Channel Amplifier
Product information

Kicker

About the Kicker 46CXA6605

From our tech experts at CEN

A 5-channel amplifier, rated at 660w RMS. Enough channels for a front and rear stage, or a front stage with the remaining channels bridged onto a sub.

Who it suits

Drivers who have upgraded their speakers and found the head unit cannot drive them. This is the step that makes good speakers sound like good speakers.

Our tech experts advise

Published power figures mean little until the amplifier is matched to the speakers and the gains are set with a meter rather than by ear. It needs a fused feed from the battery on the correct cable gauge, the part we most often see done badly. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full Kicker range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all Kicker

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: How do I choose the right amplifier for my speakers or subwoofer?

A: Match the amplifier's RMS output per channel to the RMS handling of your speakers or subwoofer at the same impedance. The Specification tab lists the power figures. If in doubt, contact CEN with your setup and we will recommend a match.

Q: What wiring do I need to install this amplifier?

A: You will need an amplifier wiring kit sized to the amplifier's power draw, typically including power and earth cable, a fuse, RCA leads and a remote wire. CEN stocks complete wiring kits, and the amplifier's fuse rating is the guide to the cable gauge required.

Q: What class of amplifier is this and does it matter?

A: Class D amplifiers are compact and efficient, ideal for subwoofers and modern installs. Class AB designs are traditionally favoured for outright sound quality on mid and high frequencies. The class is listed in the Specification tab where provided.

Q: Will an amplifier work with my factory head unit?

A: Yes, in most cases. If your head unit has no RCA outputs you will need a line output converter to feed the amplifier a clean signal. CEN stocks line output converters and can advise the right one for your vehicle.

Q: Can CEN install this amplifier?

A: Yes. CEN offers professional amplifier installation from our Nottingham premises, including secure mounting, wiring and setup. Contact us to book.

Q: Can the 46CXA660.5 power speakers and a subwoofer at the same time?

A: Yes. It has four full-range channels for door speakers (65W x 4 at 4 ohms, 90W x 4 at 2 ohms) and a dedicated Class D sub channel (150W at 4 ohms, 300W at 2 ohms).

Q: Does the 46CXA660.5 work with a factory head unit?

A: Yes. It accepts speaker-level input signals of up to 40 volts, so a line output converter is not normally needed.

Q: Is there a remote bass control for the 46CXA660.5?

A: Yes. It is compatible with the Kicker CXARC remote bass control, sold separately.