Shop All

JL Audio 15W0v3-4 15 Inch W0 Series Car Sub Subwoofer Driver 4ohm 500w RMS

RRP £309.00 £279.00 Save 10% Out of stock
Black Friday
Out of Stock
SKU: 91876MPN: 15W0-V3-4
Part of the range · 60 productsPart of the JL Audio Subwoofers range · 60 products See the range →

The JL Audio 15W0v3-4 is a 15-inch subwoofer driver from the W0v3 series, featuring a single 4-ohm voice coil and 500W RMS power handling. It uses a 2-inch voice coil and delivers 12.7mm of linear excursion for maximum low-end output at its price point.

This listing is the 15-inch 15W0v3-4. The W0v3 range is also available in the 10W0v3-4 (10-inch, 300W RMS).

Key specifications

  • Size: 15 inch
  • Power handling: 500W RMS
  • Impedance: 4 ohm (single voice coil)
  • Voice coil diameter: 2 in
  • Linear excursion: 12.7mm
  • Sensitivity: 88.2 dB (1W)
  • Frequency response: 20–200 Hz
  • Recommended sealed enclosure: 1.875 cu ft
  • Recommended ported enclosure: 2.75 cu ft (25 Hz tuning)
  • Top mount depth: 7 1/8 in
  • Cut-out diameter: 13 3/4 in

15W0v3-4: 15-inch Subwoofer Driver, 4 Ω

The 15W0v3-4 is a rugged, efficient subwoofer driver with strong excursion capability and linearity. Its 2-inch diameter voice coil and patented Elevated Frame Cooling design give it enhanced power handling and reliability for the price.

Dynamic Motor Analysis (DMA)

DMA is JL Audio's proprietary motor optimisation method. In the 15W0v3-4, it produces linear force over a long excursion range and maintains a stable magnetic field in the gap across a wide power range. The result is reduced distortion, accurate transients, and tight, clean bass.

Elevated Frame Cooling

The elevated frame channels cool air through slots directly above the top plate to the voice coil. This improves power handling and minimises dynamic parameter shifts and power compression.

  • Rear gasket: Provides an optimal seal when fitting the driver into an enclosure.
  • Long excursion: 12.7mm of linear excursion delivers louder bass with less distortion.

Enclosure compatibility

JL Audio recommends a sealed box of 1.875 ft³. The owner's manual includes a diagram for external dimensions of 16" W x 15.75" H x 18" D using 3/4" thick material. Using 5/8" material, subtract 1/4" from each dimension.

For a ported enclosure, JL Audio recommends 2.75 ft³. The owner's manual diagram shows external dimensions of 20" W x 18" H x 18.5" D using 3/4" material (subtract 1/4" from each dimension for 5/8" material). A round port 4" in diameter and 16.85" in length is recommended, giving a tuning frequency of 25 Hz and a -3 dB point of 30 Hz.

Specification
Impedance(Ohms) 4
ConeMaterial Polypropylene
SurroundMaterial Foam
Sensitivity88.2 dB at 1 watt
Frequency Response20 - 200 Hz
More specs
  • Size 15-inch
  • Basket Material ---
  • Grille None included
  • Free-Air No
  • Dual Voice Coil No
  • Max RMS Power Handling 500
  • Peak Power Handling (Watts) 800
  • Top Mount Depth (inches) 7 1/8
  • Bottom Mount Depth (inches) N/A
  • Cutout Diameter or Length (inches) 13 3/4
  • Frame Width 15.512
  • Frame Length 15.512
  • Vas (liters) 144.6
  • Fs (Hz) 24.43
  • Qts 0.482
  • Xmax (millimeters) 12.7
What's Included
  • 15W0v3-4
  • Owner's Manual
Product information

JL Audio

About the JL Audio 15W0-V3-4

From our tech experts at CEN

A JL Audio 15 inch W0 Series subwoofer driver, 4 ohm, handling 500w RMS.

Who it suits

Drivers building a system around a properly specified enclosure rather than a box off the shelf. W0 is the entry point of the W range and the sensible choice where budget matters more than the last decibel.

Our tech experts advise

This is a driver, not a finished system: enclosure volume and tuning decide most of what you hear, and JL publish specifications worth building to, and the 4 ohm coil decides how it should be wired to your amplifier. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.

Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio

Recommended For You

Discover more top-rated gear, handpicked to go with what you're viewing

Car audio installation by CEN in Nottingham

Have it Fitted By Our Team

Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.

  1. 1

    Tell us your vehicle

    Make, model and year, and what you'd like fitted.

  2. 2

    We confirm the parts

    Fascia, wiring and interfaces checked for your car, with a fitted price.

  3. 3

    Fitted at our workshop

    Bring it to our Beeston workshop and we do the rest.

Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA

Car audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in NottinghamCar audio installation by CEN in Nottingham

Frequently Asked Questions

Q: Do I need an amplifier for this subwoofer?

A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.

Q: What size enclosure does this subwoofer need?

A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.

Q: What does RMS power mean?

A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.

Q: Sealed or ported enclosure - which should I choose?

A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.

Q: Can CEN build or supply an enclosure and fit everything?

A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.

Q: What box size is recommended for the 15W0v3-4?

A: JL Audio recommends a 1.875 cu ft sealed box or a 2.75 cu ft ported box. The ported design uses a 4 inch round port, 16.85 inches long, for a tuning frequency of 25 Hz and a -3 dB point of 30 Hz.

Q: How deep is the 15W0v3-4 and what cut-out does it need?

A: The 15W0v3-4 has a top mount depth of 7 1/8 in and needs a 13 3/4 in cut-out.

Q: Is a grille included with the 15W0v3-4?

A: No. A grille is not included; the box contains the 15W0v3-4 and the owner's manual.