



JL Audio 12W0v3-4 12" 30cm W0 Series Car Sub Subwoofer Driver 4ohm 300w RMS
Couldn't Load Pickup availability
The JL Audio 12W0v3-4 is a 12" (300 mm) single 4-ohm subwoofer driver from the W0 Series, rated at 300W RMS. It features a 2" voice coil and JL Audio's patented Elevated Frame Cooling design, suited to amplifier power in the 75–300W range.
This listing is the 12". The W0v3 range is also available in 10" (10W0v3-4).
Key specifications
- Size: 12" (300 mm)
- Power handling: 300W RMS
- Recommended amplifier power: 75–300W RMS
- Impedance: 4 ohm (single voice coil)
- Voice coil diameter: 2"
- Recommended sealed enclosure: 1.375 cu ft (38.9 litres)
- Recommended ported enclosure: 1.75 cu ft (49.6 litres)
- Mounting depth: 5.40 in / 137 mm
- Mounting hole diameter: 11.0625 in / 281 mm
- Linear excursion (Xmax, one way): 0.45 in / 11.4 mm
12W0v3-4: 12-inch (300 mm) Subwoofer Driver, 4 Ω
The 12WØv3 delivers strong efficiency, excursion capability and linearity, placing it at the top of its price class. It uses a beefy 2" diameter voice coil and JL Audio's patented Elevated Frame Cooling design for enhanced power handling and reliability.
Best used with 75–300W of amplifier power, the 12WØv3 is optimised for a 1.375 cu ft (38.9 l) sealed enclosure or a 1.75 cu ft (49.6 l) ported enclosure. Detailed enclosure recommendations can be found in the Specifications tab.
Explore the full range in JL Audio W0v3 Subwoofers.
Specification
| Mounting Depth | (E) 5.40 in / 137 mm |
|---|---|
More specs
| |
What's Included
- 12W0v3-4
- Owner's Manual
JL Audio
About the JL Audio 12W0-V3-4
From our tech experts at CEN
A JL Audio 12 inch W0 Series subwoofer driver, 4 ohm, handling 300w RMS.
Who it suits
Drivers building a system around a properly specified enclosure rather than a box off the shelf. W0 is the entry point of the W range and the sensible choice where budget matters more than the last decibel.
Our tech experts advise
This is a driver, not a finished system: enclosure volume and tuning decide most of what you hear, and JL publish specifications worth building to, and the 4 ohm coil decides how it should be wired to your amplifier. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: What amplifier power does the JL Audio 12W0v3-4 need?
A: JL Audio recommends 75 - 300W RMS of amplifier power for the 12W0v3-4. It is rated at 300W RMS continuous power handling (4 ohm impedance).
Q: What box size is recommended for the 12W0v3-4?
A: The 12W0v3-4 is optimised for a 1.375 cu ft (38.9 litres) sealed enclosure or a 1.75 cu ft (49.6 litres) ported enclosure. Full enclosure details are in the Specification tab.
Q: How deep is the 12W0v3-4 and what cut-out does it need?
A: The 12W0v3-4 has a mounting depth of 5.40 in / 137 mm and needs a mounting hole (cut-out) diameter of 11.0625 in / 281 mm.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →

































