





JL Audio 12TW3-D4 12 Inch TW3 Series Shallow Mount Subwoofer Dual 4 ohm 400w RMS
Couldn't Load Pickup availability
The JL Audio 12TW3-D4 is a 12-inch (300 mm) shallow-mount subwoofer from the TW3 Series, with dual 4 ohm voice coils and 400W RMS power handling. Its mounting depth of just 3.5 in (89 mm) and minimal sealed enclosure requirements make it suited to vehicles with limited installation space.
This listing is the dual 4 ohm version. The 12TW3 is also available in dual 8 ohm (12TW3-D8), and the TW3 Series is also available as the 10-inch 10TW3-D4.
Key specifications
- Size: 12 inch (300 mm)
- Power handling: 400W RMS
- Recommended amplifier power: 200–400W RMS
- Impedance: dual 4 ohm (dual voice coil)
- Mounting depth: 3.5 in / 89 mm
- Mounting hole diameter: 11.625 in / 295 mm
- Linear excursion (Xmax, one way): 0.6 in / 15.2 mm
12TW3-D4 shallow-mount subwoofer
The TW3 builds on the core technology of JL Audio's TW5 thin-line subwoofers, combining shallow mounting depth with high excursion capability — exceeding that of the W3v3 Series drivers.
JL Audio's patented thin-line woofer technology achieves this using a "concentric tube" structure moulded into the cone body. This supports the voice coil and a full annular spider, while positioning the large motor structure further forward than conventional designs allow.
TW3s are optimised for small enclosures and use a tab-ear mounting design to maximise cone area within their mounting footprint.
- Very shallow mounting depth (3.25 / 3.50 inches)
- No pole vent: permits mounting close to the rear wall of an enclosure
- Very small sealed enclosure volume requirements
- Very long linear excursion capability (0.60 in / 15.2 mm, one-way)
- DMA-optimised motor design
- "Concentric tube" architecture
- Patented "floating cone attach method" technology
- Cast alloy frame
- Injection-moulded, mica-filled polypropylene cone
- Rubber surround
- Aluminium-alloy dust cap and rear cap with JL Audio logo
- Precision-built in the USA at JL Audio's Miramar, Florida factory with global components
Explore the full range in JL Audio TW3 Shallow Mount Subwoofers.
Specification
| Overall Diameter (A) A1 | 13.2 in / 335 mm |
|---|---|
| A2 | 12.5 in / 318 mm |
| Mounting Depth | (E) 3.5 in / 89 mm |
More specs
| |
What's Included
- 12TW3-D4
- Warranty information
- JL Audio stickers
JL Audio
About the JL Audio 12TW3-D4
From our tech experts at CEN
A JL Audio 12 inch TW3 Series subwoofer driver, shallow mount for vehicles where depth rules out a conventional sub, dual 4 ohm, handling 400w RMS.
Who it suits
Drivers building a system around a properly specified enclosure rather than a box off the shelf. TW3 gives more output than TW1 while staying shallow.
Our tech experts advise
This is a driver, not a finished system: enclosure volume and tuning decide most of what you hear, and JL publish specifications worth building to, and the dual 4 ohm coils decide how it should be wired to your amplifier. We build enclosures to suit both driver and vehicle at our Beeston workshop. Installation is priced per vehicle, so get in touch with your make, model and year and we will confirm what it needs. See car audio installation.
Explore the full JL Audio range at CEN, with fast UK dispatch and expert advice from our Nottingham team. Shop all JL Audio
Recommended For You
Discover more top-rated gear, handpicked to go with what you're viewing

Have it Fitted By Our Team
Our team fits car audio, stereos, dash cams and vehicle security at our workshop in Beeston, Nottingham. Tell us your vehicle and we'll confirm the parts and a fitted price.
- 1
Tell us your vehicle
Make, model and year, and what you'd like fitted.
- 2
We confirm the parts
Fascia, wiring and interfaces checked for your car, with a fitted price.
- 3
Fitted at our workshop
Bring it to our Beeston workshop and we do the rest.
Unit 25 Technology Drive, Beeston, Nottingham NG9 1LA
Frequently Asked Questions
Q: Do I need an amplifier for this subwoofer?
A: Yes, unless it is an active (powered) subwoofer with a built-in amplifier. Passive subwoofers need an external amplifier matched to the RMS power and impedance shown in the Specification tab.
Q: What size enclosure does this subwoofer need?
A: The recommended enclosure volume is listed in the Specification tab where the manufacturer provides it. As a rule, sealed enclosures give tighter, more accurate bass while ported enclosures deliver more output. Contact CEN if you would like a recommendation for your build.
Q: What does RMS power mean?
A: RMS is the continuous power a subwoofer can handle, and it is the number that matters when matching an amplifier. Peak or max figures describe short bursts only. Match your amplifier output to the RMS rating in the Specification tab.
Q: Sealed or ported enclosure - which should I choose?
A: Sealed boxes are compact and produce tight, controlled bass suited to sound quality builds. Ported boxes are larger and produce more output at low frequencies, suited to those who want maximum impact. Either works well when built to the recommended volume.
Q: Can CEN build or supply an enclosure and fit everything?
A: Yes. CEN supplies enclosures and offers professional installation from our Nottingham premises, including amplifier wiring. Contact us to discuss your build.
Q: What amplifier power does the JL Audio 12TW3-D4 need?
A: JL Audio recommends 200 - 400W RMS of amplifier power for the 12TW3-D4. It is rated at 400W RMS continuous power handling (dual 4 ohm impedance).
Q: How deep is the 12TW3-D4 and what cut-out does it need?
A: The 12TW3-D4 has a mounting depth of 3.5 in / 89 mm and needs a mounting hole (cut-out) diameter of 11.625 in / 295 mm.
Q: Can the 12TW3-D4 be wired to different impedances?
A: Yes. With dual 4 ohm voice coils, the 12TW3-D4 can be wired as a 2 ohm (parallel) or 8 ohm (series) load to suit your amplifier.
Q: Can the 12TW3-D4 be mounted close to the back of the box?
A: Yes. TW3 subwoofers have no pole vent, which permits mounting close to the rear wall of the enclosure.
Not Sure Where to Start?
Straightforward advice and the latest news from our Nottingham team.
All Guides and News →
Car Audio
Helix Compose i5 Expands: FlexMount Speakers for Cars That Fight Back
Read more →
Car Audio
Pioneer Perfect Fit 9-Inch Stereos: Fitting Kits and Every Car They Fit (2026)
Read the guide →
Car Audio
BMW Speaker Upgrades Explained: Where to Start and What Fits
Read the guide →
Car Audio
Christmas Gift Guide 2026: Car Audio, Dash Cams and Outdoor Tech
Read the guide →
Car Audio
Upgrading Car Audio Without Replacing the Factory Stereo
Read the guide →
Car Audio
Amplifier Wiring Kits Explained: Gauge, Fuses and Earths
Read the guide →



































